Advertisement
4. CONTENTS
1 Oil pump 1pc
2 Oil cylinder assy. 1pc
3 Frame assy. 1pc
4 Foot base assy. 2pc
5 Bed pin 2pc
6 Work bench assy. 1pc
7 V block 2pc
8 Handle assy.1 1pc
9 Oil pipe 1pc
10 Winch handle 1pc
11 Winch handle holder 1pc
12 Foot pedal valve 1pc
13 Circlip 4pc
14 Parts tray 1pc
15 Handle holder 15
16 Handle assy.2 1pc
17 Pump connecting rod 1pc
18 Hex screw M10 4pc
19 Hex screw M8 4pc
20 Shoulder screw M6x30 2pc
21 Shoulder screw M6x25 1pc
22 Nut M10 4pc
23 Bolt M8 4pc
24 Nut M6 3pc
25 Spring washer Ø10 4pc
26 Spring washer Ø8 4pc
27 Spring washer Ø6 3pc
5. ASSEMBLY
WARNING! these presses are heavy, the use of a lifting appliance is recommended.
‰
5.1.
FIT FEET fig.1
5.1.1.
Use parts 18, 22, 25 to fit
5.1.2.
It is recommended that, for safest operation, the press is secured to the floor using the fixing holes in the feet.
5.2.
FIT PUMP HANDLE fig.2
5.2.1.
Fit 16 & 17 onto part 1.
5.2.2.
NOTE: pull out transit pin a.
5.2.3.
Press button on handle part 8 and part 16. After inserting make sure button pops up.
fig.1
© Jack Sealey Limited
Original Language Version
fig.2
PPF100S Issue 3 (3) 06/07/22
Advertisement
