Page 1
IP200 ETX Base Board USER’S MANUAL Version 1.2...
Page 2
PS/2 are trademarks of International Business Machines Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. IP200 User’s Manual...
2 x fan connectors 1 x pin-header for panel backlight control 1 x 4-pin CD-ROM power outlet header 1 x 4-pin FDD power outlet header Operation Temp. 0°C~60°C (32°F~140°F) -20°C~80°C (-68°F~176°F) Storage Temp. Relative Humidity 10%~90% (non-condensing) IP200 User’s Manual...
INTRODUCTION Checklist Your IP200 package should include the items listed below. Damaged or missing items should be reported to your supplier. • The IP200 ETX Baseboard • This User’s Manual • One compact disc containing the following: • Ethernet Drivers •...
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IP200 in order to set up a workable system. The topics covered are: Setting the Jumpers ............. 6 Connectors on IP200 ............13 IP200 User’s Manual...
INSTALLATIONS Setting the Jumpers Jumpers are used on the IP200 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IP200 and their respective functions.
INSTALLATIONS Jumper Locations on IP200 Jumper on IP200................Page COM1 / COM2 / COM3 / COM4 RS232/422/485 Settings... 8 JP20: RI Setting for COM1 ............9 JP19: RI Setting for COM2 ............9 JP18: RI Setting for COM3 ............9 JP17: RI Setting for COM4 ............10 JP9: RI Setting for COM5 ............
1-2 short +12V 2 4 6 3-4 short RI (default) 1 3 5 5-6 short JP18: RI Setting for COM3 JP18 Setting Function 1-2 short +12V 2 4 6 3-4 short RI (default) 1 3 5 5-6 short IP200 User’s Manual...
JP16: RI Setting for COM6 JP16 Setting Function 1-2 short +12V 2 4 6 3-4 short RI (default) 1 3 5 5-6 short JP15: LVDS Voltage Setting JP15 Setting LAN2 Function Pin 1-2 3.3V (default) Short/Closed Pin 2-3 Short/Closed IP200 User’s Manual...
JP26: Audio Source Setting for Audio AMP JP26 Setting Function 2 4 6 1-3, 2-4 From AC97 Line out short (default) 1 3 5 3-5, 4-6 From speaker short J28: CMOS Setting Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed IP200 User’s Manual...
INSTALLATIONS Connectors on IP200 The connectors on IP200 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. Connector Locations on IP200 ............. 14 X1, X2, X3, X4: ETX Connectors ..........15 ..............15 X1: PCI Bus, USB, Audio ...................
Pin # Signal Name Green Blue N.C. N.C. DDDA HSYNC VSYNC DDDK CN2: Mouse Connector Pin # Signal Name Mouse data N.C. Mouse clock N.C. CN3: Keyboard Connector Pin # Signal Name Keyboard data N.C. Keyboard clock IP200 User’s Manual...
J4, J7: COM5 and COM6 Serial Ports Pin # Signal Name DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal ready Ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator IP200 User’s Manual...
Pin # Pin # Signal Name LED2- LED2+ LED1- LED1+ MX4+ MX4- MX3+ MX3- MX2+ MX2- MX1+ MX1- J6: Internal Pin Header for 10/100 LAN Signal Name Pin # Pin # Signal Name LED2+ LED2- LED1+ LED1- IP200 User’s Manual...
Line In R Ground Ground Line Out L Line Out R J22: CD-In Audio Connector Pin # Signal Name Ground CD Audio L Ground CD Audio R J23: Power Connector Pin # Signal Name +12V Ground Ground IP200 User’s Manual...