Advertisement
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the users manual of the end
product which integrate this module.
The users manual for OEM integrators must include the following information in a prominent
location " IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements,
the antenna used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunc tion with any
other antenna or transmitter.
CyberTAN declared that WRV54GP2M is limited in CH1~11 by specified firmware
controlled in USA.
Canada (IC):
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment
(or its transmit antenna) that is installed outdoors is subject to licensing.
Cisco-Linksys
3
Proprietary & Confidential Information
Advertisement
