Tig Torch - Matco Tools MATACTT2V Owner's Manual

EFFECTIVE DECEMBER 1, 2015
LIMITED WARRANTY
This warranty applies to the original purchaser and is
subject to the terms and conditions listed below.
This Limited Warranty is for new equipment sold
after the above date, providing coverage for defects
in material and workmanship at the time it is
shipped from the factory.
Limited to the warranty periods below, Matco Tools
will repair or replace the item under warranty that
fails due to defects in material and workmanship.
Matco Tools must be notified within 30 days of the
failure, so as to provide instructions on how to
proceed with the repair of your welder and warranty
claim processing. Warranty period begins at the time
the welder is purchased from an Authorized Matco
Tools distributor. Keep your receipt as proof of
purchase.
Warranty Periods
Limited Warranty is divided into three categories. No
Warranty, 1 year and 3 year.
No Warranty
Normal wear items, MIG gun parts (contact tips,
nozzle, contact tip adapter, MIG gun liner), drive roll,
electrode holder, ground clamps, plasma torch parts
(nozzle, electrode, diffuser, cover), and TIG torches
are considered consumable items and are not
covered under warranty.

TIG TORCH

Parts and Labor on MIG gun parts (except those
listed under normal wear items), cables, regulator,
and plasma torch (except those listed under normal
wear items) are covered for 1 year. Any shipping
related to warranty repair is the responsibility of the
customer.
Please see your product information to determine if
your product has a 1 year or 3 year warranty. This
warranty covers Parts and Labor on items such as:
transformer, reactor, rectifier, solenoid valve, PC
board, switches, controls, gas valve, drive motor,
drive system other than drive roll and any other
component that requires the removal of the sheet
metal to access. Any shipping related to warranty
repair is the responsibility of the customer.
Warranty does not apply to: shipping damage,
misuse and abuse of the unit and alteration of the
unit in any way.
This is a Parts and Labor warranty. Contact the
Matco Tools distributor you purchased the unit
from. Retain your receipt in the case a warranty
claim is needed. No warranty will be provided
without the original receipt from an authorized
Matco Tools distributor. To make a warranty claim,
contact your Matco Tools distributor. That Matco
Tools distributor will contact the customer service
department for warranty instructions.
1 Year Accessories Warranty
1 Year/3 Year Welder Warranty
Voiding Warranty
Warranty Claim
1901026-12