Table of Contents
Advertisement
Operation Manual / TPL67-C.. - TPL71-C..
9 Taking out of operation at short notice / 9.2 Locking the rotor
Table of tightening
torques
© Copyright 2020 . All rights reserved.
Part no.
TPL67-C
72027
M14
75 Nm
94007
M8
25 Nm
Remove silencer or air suction branch.
u
NOTICE
Carry out the work as described in the chapter Disassembly and As-
sembly.
Insert locking flange (94003) into compressor wheel.
u
Put screws (94007) into unoccupied threaded holes in compressor
u
wheel and tighten to values shown in Table of tightening torques.
CAUTION
Do not remove any balancing screws from compressor wheel. Use only
unoccupied threaded holes to fit lifting spigot.
Position assembly / disassembly device (90020) over studs (72026)
u
and locking flange (94003).
Turn compressor wheel so that locking flange hexagon aligns with
u
hexagon in assembly / disassembly device (90020).
HZTL2488_EN
TPL71-C
M16
105 Nm
M8
25 Nm
Rev.G
March 2020
Advertisement
Table of Contents
