Ram Mounts RAM-HOL-MOT9PLU Assembly Instructions

RAM-HOL-MOT9PLU AND RAM-2461U
The RAM-HOL-MOT9PLU comes fully assembled. It also
includes QTY. 4, #10-24 1.5" screws to mount the RAM-
2461U (not included).
1) Align the RAM-2461U over the 75mm x 75mm hole
pattern and install the additional QTY. 4 #10-24 1.5"
screws and tighten screws into nylock nuts. Due to the off-
set 1 ½" dia. ball, the RAM-2461U can be positioned in any
of the 4 directions based on the specific mounting needs.
2) With the RAM-2461U securely attached to the RAM-
HOL-MOT9PLU, you are able to mount this unit in vehicles,
on walls, flat surfaces and more, using the appropriate
RAM Mounts for your specific application.
AND WARRANTY INFORMATION
LIFETIME WARRANTY FOR ALL MOUNTING COMPONENTS.
TWO YEAR WARRANTY ON ALL INTERNAL ELECTRONICS
The exclusive NPI Lifetime Warranty states that all RAM mounting
components and parts are warranted against defects in materials and
workmanship for the life of the product or part.
NPI'S Lifetime Warranty covers the mount or its components only. The
mounted device is not covered under the Lifetime Warranty and will not
be replaced if damaged as a result of mount failure.
This warranty is expressly limited to the persons in the United States,
and all foreign countries who purchase RAM for resale or use in the
ordinary course of the buyer's business. This warranty does not cover
any product or part that has been abused, worn out, heated, ground or
otherwise altered, used for a purpose other than that for which it was
intended, or used in a manner inconsistent with any instructions
regarding its use.
National Products, Inc., 8410 Dallas Ave S., Seattle, WA 98108, (206) 763-8361 www.ram-mount.com
ASSEMBLY INSTRUCTIONS
RAM-HOL-MOT9PLU PORTS
RJ-45
DC POWER
QTY. 3 : USB 2.0 PORTS
RAM-2461U is not included
with RAM-HOL-MOT9PLU
VGA
RMR-INS-MOT9PL