Table of Contents
Advertisement
A
Turning the Monitor Off
To clear shooting information from the monitor, press the R button or
press the shutter-release button halfway. The monitor will turn off
automatically if no operations are performed for about 8 seconds (for
information on choosing how long the monitor stays on, see Auto off
timers on page 240). The monitor will also turn off if you cover the eye
sensor or look through the viewfinder.
A
Info Display Auto Off
The eye sensor will automatically turn the information display off if you
put your eye to the viewfinder while the standby timer is active. The
display will turn on again when you remove your eye from the
viewfinder. If desired, you can prevent the information display turning
off using the Info display auto off option (0 265) in the setup menu.
Note, however, that regardless of the option selected the information
display will turn off when the standby timer expires.
8
Introduction
Advertisement
Table of Contents
