Dvb-T; First Time Installation - Elonex LNX809i User Manual

Please press the DVD/USB/DVB button on the remote control to appear the menu, where
you can change to DVB. Navigate with the UP or DOWN button the DVB and activate DVB
by pressing the ENTER button.
If you use DVB-T the first time, than the system entered to the First Time Installation.

First Time Installation

After all the connections have been
made properly, switch on your TV.
Make sure the
receiver is connected to the mains and press
<POWER> to switch the receiver on.
you are using
first time,
Installation
displayed to guide
initial setup. Use the remote controller to
finish the setup.
At the First time installation menu, select
―YES‖ and press
on the remote controller to proceed.
Enter your regional settings, include
Country, Language, Time Zone.
Please change the country settings in
order to your active country.
Then select ―NEXT‖ to proceed.
Please navigate to ―YES‖ and confirm
by pressing the
the Auto search starts.
Note:
The previous channel list will be deleted and
replaced by the new one.
the receiver for
a First
menu will
you through
ENTER button
ENTER button.

DVB-T

If
the
Time
be
the
your
Than
36