Installing The Device; Automatically - Hawking WE110P User Manual

Installing the Device

Automatically

If the Application setup in Installing the
Utility section has been completed, follow
below steps to install the device.
1. Locate the CardBus slot of your system.
2. Align the Hawking Wireless CardBus PC
Card toward the CardBus slot. Push evenly
and steadily until it is seated.
After the device has been connected to your
computer, Windows will detect the new hardware
and then automatically copy all of the files
needed for networking.
For Windows 98 users: As you perform the
installation, have your
CD-ROM at hand. You may be asked to insert
the OS CD-ROM for the system to download a
specific driver.
For Windows 2000 users: When Digital
Signature Not Found screen appears, click
Yes to continue.
For Windows XP users:
1. Select Install from a list or specific
location (Advanced) and click Next.
2. Click Continue Anyway.
3. Click Finish to complete the installation.
-
10 -
system operating