Jocel JLR013989 Instruction Manual page 58

Spin and drain phase: the light above this icon will flicker during the
spin and drain phase.
❖ Buttons
The following is the instruction of the buttons and their setting options.
1. Power ( )
Press this button to turn the machine on or off.
2. Start/pause (
Press this button to start or pause a wash cycle. To reload the laundry during a
wash cycle, press this button for 3 seconds, and the machine will drain if the
water level is too high. The reload function is unavailable if the temperature of
the water is too high.
3. Speed
Press this button repeatedly to change the spin speed.
4. Temp
Press this button repeatedly to change the wash temperature.
5. Rinse
Press this button repeatedly to change the rinse times.
6. Delay
Press this button repeatedly to change the delay time.
7. Child lock ("Program +
When the machine starts, press the "Program" and " " buttons at the same
time for a few seconds and the light under the icon
function works. Press the same buttons a few seconds to cancel this function.
When the function works, all buttons are not available, except for the button
" ".
Note
For your safety, do not press the "
machine is running. Because the temperature of water may be high and it may
scald you.
The door lock will open automatically at the end of a wash cycle while the
temperature of the drum is cool down.
)
")
" button and get out clothes while the
58
" "
is lighting, and the