Advertisement
Advertisement
Table of Contents
Summary of Contents for SoundForce SFC-60
- Page 1 SoundForce SFC-60 Manual V1.0...
- Page 2 Workflow : The SFC-60 sends CC MIDI messages to the TAL U-NO-LX to take control of the synth parameters. Therefore the plugin needs the right MIDI mapping and MIDI needs to be routed to the plugin's track. To make your life easier, a mapped preset for the plugin has been made and can be downloaded here : http://sound-force.nl/wp-content/uploads/2015/05/SFC-60_mapped_preset.pjunoxl.zip...
- Page 3 Please note : This function is not working consistently in some versions of Abelton Live 9 at moment. Step sequencer : The SFC-60 Firmware version 10 has brought a hardware step sequencer function into the SFC-60 MIDI controller. Both the controller normal function and the step sequencer function can run simultaneously which means that you consistently tweak your sequence as well as the synth parameters, going back and forth between normal mode and step sequencer mode.
- Page 4 When on internal clock, the tempo of the step sequencer is set with the ARP "tempo" slider. To clock the SFC-60 step sequencer to your DAW, please make sure that your DAW is sending MIDI clock signal to the MIDI controller (this set-up is described in your DAW user manual). You will probably have to set a certain clock offset to make sure things are running sync depending on your system.
Need help?
Do you have a question about the SFC-60 and is the answer not in the manual?
Questions and answers