KaRo HiLo Height Adjustable Desk How To Program

How to program your HiLo Height Adjustable Desk
The HiLo Height Adjustable Desk is simple to program and there are 3 height settings to
accommodate most users. Follow these simple steps on how to use the control panels
various functions.
How to adjust the height of the desk:
‐ Press the up arrow to increase the height of the desk up to a maximum of 126cm.
‐ Press the down arrow to decrease the height of the desk to a minimum of 72cm.
How to save your favourite heights for ease of use:
‐ Use the up or down arrow to adjust the height of the desk to a comfortable height for you.
‐ Now press and release the Memory button "M".
‐ The Digital Display will show an "S‐".
‐ Now press and release any of the numbers 1 to 3 to program your current position.
‐ To program the other 2 additional height settings, repeat the previous four steps and select a number that
has not yet been programmed.
‐ Please note that if you program a different height setting using the same number, the new position will be
saved over the programmed height setting.
Adjusting the height of the desk to a pre‐set height:
‐ To adjust the height of the desk to a pre‐set height, press and release one of the buttons 1 to 3 of the
corresponding pre‐set height you would like to adjust the desk to.
‐ The desk will start moving and will stop automatically once it has reached the pre‐set height.
‐ If at any point you would like to stop the desk whilst in motion, simply press any button on the control panel
to immediately stop the movement of the desk.
K a r o M a n u f a c t u r i n g ( P t y ) L t d
The Soft‐Touch control panel has a:
‐ digital display;
‐ up and down buttons for the height adjustment;
‐ 3 programmable memory position buttons; and
‐
a memory setting button.
Tel: (+27 11) 392-6803
3 Platinum Road, Spartan ext 16, 1619 | P O Box 877, Edenvale, 1610
info@karo.co.za www.karo.co.za
....2/