Download Print this page

Advertisement

Quick Links

1P64FJV
Owner's Manual
Thank you for selecting this engine. Before operating this engine, please
read and understand this Owner's Manual. Failure to follow instructions in

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1P64FJV and is the answer not in the manual?

Questions and answers

Summary of Contents for Talon 1P64FJV

  • Page 1 1P64FJV Owner’s Manual Thank you for selecting this engine. Before operating this engine, please read and understand this Owner’s Manual. Failure to follow instructions in...
  • Page 2: Table Of Contents

    this manual could result in serious injury or death. Table of Contents Safety………………………………………………………………………………………………………..2 Engine Parts………………………………………………………………………………………………..5 Before Starting Engine…………………………………………………………………………………….5 To Start Engine…………………………………………………………………………………………….9 To Stop Engine……………………………………………………………………………….....10 Maintenance………………………………………………………………………………….....11 Transporting and Storage…………………………………………………………………………………15 Specifications………………………………………………………………………………………………15 Indicates danger, warning, or caution. Attention is required in SAFETY ALERT SYMBOL: order to avoid serious personal injury.
  • Page 3: Safety

    A. Safety READ ALL INSTRUCTIONS BEFORE OPERATING ★ Read the instructions carefully. Be familiar with the controls and proper use of the engine. ★ Do not operate this engine when tired, ill, or under the influence of alcohol, drugs, or medication. ★...
  • Page 4 ★ When engine running, the muffler will be extremely hot and it will keep hot for a period of time after engine stopped. Don’t touch it when muffler is hot, let the engine cool completely before moving or storing it. ★...
  • Page 5 SYMBOL DEFINITION Indicates Warning, Danger, and Caution. Read all Safety, Operating and Maintenance Instructions before running engine. Always use clean, fresh unleaded fuel. Refer to User’s manual for the proper type of oil. Push primer bulb, fully and slowly, 3 times. Do not touch a hot muffler or cylinder.
  • Page 6: Engine Parts

    B. Engine Parts C. Before Starting Engine Oil Information Type of Oil to Use ★ Use a high quality detergent oil classified “For service SF, SG, SH, SJ” or higher. ★ SAE 10W-30 is recommended for general use. Other viscosities shown STARTING TEMPERATURE RANGE in the chart may be used when the average temperature in your area is within the indicated range.
  • Page 7 Oil Capacity The engine holds approximately 0.38 L 1. Check oil level WARNING ★ Running engine without oil will damage your engine seriously. ★ When checking oil, turn engine OFF and place it level. a. Remove dipstick and wipe clean it with cloth. b.
  • Page 8 2. Fuel Fuel Information Type of Fuel to Use ★ This engine is certified to operate on unleaded gasoline with a minimum of 77 octane. Fresh fuel prevents gum from forming in the fuel system. Purchase fuel in quantity that can be used within 30 days. ★...
  • Page 9 Add fuel: a. Remove fuel tank cap. b. Place spout of gasoline container into the fill hole on the fuel tank and fill tank.Do not over fill. c. Wipe up any gasoline that may have spilled. d. Reinstall the fuel tank cap.
  • Page 10: To Start Engine

    D. To Start Engine WARNING ★ Never run engine indoors or in enclosed or poorly ventilated areas. Engine exhaust contains carbon monoxide,an odorless and deadly gas. ★ Keep hands, feet, hair and loose clothing away from moving parts or engine and equipment. ★...
  • Page 11: To Stop Engine

    E. To Stop Engine 1.Pull the trigger of the speed contral assembly to the “stop” position as shown by arrow,engine can stop. Trigger Stop position 2. After engine is stopped Never store engine with fuel in tank indoors or in enclosed,poorly ventilated areas,where fuel fumes may reach on open flame,spark or pilot light as on a furnace,water heater,clothes drier or other gas appliance.
  • Page 12: Maintenance

    F. Maintenance WARNING ★ Priors to any maintenance, stop engine and switch it off first. ★ Disconnect spark plug wire from the spark plug to prevent unintentional engine starting. ★ Move the spark plug wire away from the engine because unintentional sparking can result in fire.
  • Page 13 CAUTION: ☆ Drain engine oil and change it after first 5-8hours of operation and every 50 hours or three months after that. It is also a highly recommendation to change oil every 25 hours under heavy load or in high temperature. ☆...
  • Page 14 WARNING WARNING Prevent skin contact with used engine oil. Wash your skin with soap and water after oil change. Prevent skin contact with used engine oil. Wash your skin with soap and water after oil change. CAUTION: Used oil is a hazardous waste product. We suggest you put used oil in a sealed container and send to your local recycling center.
  • Page 15 3. Spark plug Recommended Spark plug: F6RTC WARNING Do NOT use an improper heat range spark plug. Stop the engine and allow it to cool a. Remov spark plug with a spark plug wrench. b. Inspect the spark plug visually. If spark plug is worn,dirtyor has cracks,replace it with the recommended type and heat range.
  • Page 16: Transporting And Storage

    Pull starter rope slowly several times to distribute the oil in the engine. 5. Slowly pull starter rope until feels force against you. Stop pulling. At that point, valves are closed, that will prevent dust and rust from entering cylinder. H. Specificationsm Model 1P64FJV 4-stroke,overhead , Engine type single cylinder Displacement(cm³) Bore ×Stroke(mm)...