Attaching The Baby Seat At The Adapter; Removing The Baby Seat From The Adapter - Naturkind Lux Operating Instructions Manual

4.2 Attaching the baby seat at the adapter

1. Actuate the parking brake of the stroller.
2. Attach the adapter as described to the
frame.
3. Position the handle bar of the baby seat
vertically so that it locks into position.
Attach the baby seat to the adapter using
the mounting slots. The baby seat is
engaged on both sides with an audible
„click". Make sure that the baby seat is
safely attached to the adapter by lifting it.

4.3 Removing the baby seat from the adapter

1. Actuate the parking brake of the stroller.
Position the handle bar of the baby seat
vertically so that it locks into position.
Warning!
Before use, make sure that the
adapter is properly engaged.
Never attach the baby seat in the
driving direction of the frame!
2. The seat may be lifted from the adapter
by simultaneously pressing both push
buttons on the right and left side (see the
operating instructions of your baby seat).
21