Summary of Contents for K&S ARISMD
- Page 1 MD Installation Guide Installation Guide Copyright K&S Advanced Systems Ltd All Rights Reserved...
-
Page 2: Installation Highlights
MD Installation Guide 1. Introduction 1.1. Installation Highlights 1.1.1 Installation aris – Active vibration isolation modular system with number of mdxxx independent individually managed and controlled vibration isolation units (isolators). aris installation is performed by K&S engineers. Once the system is MDxxx installed, initialized and optimized its typically does not require any re-tuning. - Page 3 MD Installation Guide 2. Unpack the System Figure 2 aris aris Unpack all md isolators and MD PoCom box Copyright K&S Advanced Systems Ltd All Rights Reserved...
- Page 4 MD Installation Guide 3. Mechanical Installation Instruction Step 1 aris Attached Loading Plate to Isolator (Supplied together with the system) - Figure Figure 3 Copyright K&S Advanced Systems Ltd All Rights Reserved...
- Page 5 MD Installation Guide Step 2: Insert Isolators under the machine frame in appropriate points. No Need to lift the machine! Figure 4 Figure 4 Step 3: Attach Loading Plates to Machine Frame in all relevant points. Figure 5 Attachment points defined by K&S Engineer’s prior installation Figure 5 Copyright K&S Advanced Systems Ltd All Rights Reserved...
- Page 6 MD Installation Guide Step 4 aris Adjust Leveling by M12 locking nuts to each Isolator. Figure 6 Figure 6 Step 5: Using External Leveling bubble or similar tool ensure that the machine is leveled by aris adjusting leveling one by one for all Isolators.