Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for FiT 501105
- Page 1 INSTRUCTION MANUAL TIRE PRESSURE SENSOR FIT 501105 | 501228 | 501229 | 501230 501244 | 501267 | 501268 Biketec GmbH Luzernstrasse 84 NETWORKED CH-4950 Huttwil CUSTOMISED T +41 62 959 53 00 INTELLIGENT info@biketec.ch fit-ebike.com...
-
Page 2: Table Of Contents
FIT DISPLAY COMFORT ........ -
Page 3: Preface
1 PREFACE Dear FIT customer, The FIT system offers many useful functions and options and we are pleased that you have decided to choose our system. Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick start. -
Page 4: About These Operating Instructions
INSTRUCTION MANUAL TPMS FIT 2 ABOUT THESE OPERATING INSTRUCTIONS 2.1 MANUFACTURER Biketec GmbH Luzernstrasse 84 CH-4950 Huttwil fit-ebike.com/en-en/ 2.2 LANGUAGE The original operating instructions are written in German. A translation is invalid without the original operating in- structions. 2.3 DECLARATION OF CONFORMITY Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives. -
Page 5: Safety Instructions
The generic names used in these operating instructions, such as motor, battery and operating element, all refer to original FIT e-bike components. 3.2 TYRE PRESSURE SENSOR Do not use the sensor if it is damaged and / or if there are other visible defects. You must use a new sensor in such cases. -
Page 6: Product And Technical Specifications
4 PRODUCT AND TECHNICAL SPECIFICATIONS 4.1 FIT TYRE PRESSURE SENSOR FIT tyre pressure sensors monitor the pressure in your e-bike’s tyres. They transmit the tyre pressure data to your e-bike’s display or to the FIT E-Bike Control phone app in real time via Bluetooth. -
Page 7: Technical Data
Type Part no. Manufacturer Schrader Measurement range bar Up to 8.3 Accuracy Suitable valve SV-Presta Sclaverand Protection class IP67 Operating temperature °C Up to +40 Storage temperature °C Up to +50 Battery life (battery cannot be replaced) Min. 5 years Weight about kg 4.5.2 FIT SV-PRESTA SCLAVERAND TYRE PRESSURE SENSOR FIT tyre pressure SV-Presta Sclaverand... -
Page 8: Fitting
NOTICE Release air from the tyre before fitting. Fit and / or service the product with the hand tool indicated in the installation instructions. 5.1 FIT AV-SCHRADER & FIT SV-PRESTA SCLAVERAND TYRE PRESSURE SENSOR Remove the existing valve cap and valve insert. - Page 9 INSTRUCTION MANUAL TPMS FIT Fit the new valve. Fasten the new valve into place. When fitting on tubeless tyres, ensure that the valve rim nut is firmly fastened. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022...
- Page 10 INSTRUCTION MANUAL TPMS FIT Attach the sensor housing as shown in the image. Attach the nut. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022...
- Page 11 INSTRUCTION MANUAL TPMS FIT Pump up the tyres. Fasten the valve insert. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022...
-
Page 12: Filling With Tubeless Sealant
INSTRUCTION MANUAL TPMS FIT Put on the valve cap. 5.2 FILLING WITH TUBELESS SEALANT The entire sensor unit must be removed from Do not fill the tyre sealant through the sensor the valve stem and the valve must be valve without removing the sensor and the unscrewed before the tyre is filled with valve unit. -
Page 13: Operation
INSTRUCTION MANUAL TPMS FIT 6 OPERATION 6.1 INITIAL OPERATION Connect your e-bike to the FIT E-Bike Control app. Select the Tyre pressure menu option. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022... - Page 14 INSTRUCTION MANUAL TPMS FIT Select + to add a new tyre pressure sensor. Follow the instructions in the FIT E-Bike Control app. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022...
- Page 15 INSTRUCTION MANUAL TPMS FIT Select the wheel where the tyre pressure sensor which you wish to connect is located and press on NEXT. Follow the instructions in the FIT E-Bike Control app. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022...
- Page 16 INSTRUCTION MANUAL TPMS FIT Position the QR code for the tyre pressure sensor which you wish to connect within the green corners. Connection will proceed as soon as the QR code is detected. The app will now search for the tyre pressure sensor.
- Page 17 INSTRUCTION MANUAL TPMS FIT Congratulations! You have successfully added the tyre pressure sensor. Follow the instructions in the FIT E-Bike Control app. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022...
- Page 18 INSTRUCTION MANUAL TPMS FIT Repeat the same steps to add the second tyre pressure sensor. You can now set the minimum and target pressures for both wheels. FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022...
- Page 19 INSTRUCTION MANUAL TPMS FIT Use - and + to set the required target pressure and press OK to save the set- ting. Use - and + to set the required minimum pressure and press OK to save the setting. Repeat the process for the other wheel.
-
Page 20: Display And Settings
PSI or bars. Select the preferred unit and press OK to save the setting. 6.2 DISPLAY AND SETTINGS 6.2.1 FIT DISPLAY COMFORT DISPLAY Once the tyre pressure sensors are connected, you can display the current values for the front and rear wheels by pressing on the selector button (DRIVE sub-screen 2) in the Drive menu. - Page 21 INSTRUCTION MANUAL TPMS FIT The pressure gauge is highlighted in red if pressure falls below the pre-set minimum level. SETTINGS The tyre pressure settings are found in the settings menu. The settings menu can only be accessed when the e-bike is stationary.
-
Page 22: Fit Display Compact
INSTRUCTION MANUAL TPMS FIT 6.2.2 FIT DISPLAY COMPACT DISPLAY Once the tyre pressure sensors are connected, you can display the current values for the front and rear wheels by pressing on the selector button (DRIVE sub-screen 2) in the Drive menu. - Page 23 INSTRUCTION MANUAL TPMS FIT The tyre pressure ranges and the pressure unit can be adjusted in the tyre pressure sub- menu. You can use the selector button (right/left) to change the pressure unit between psi and bar. Press on the selector button to save the selected setting.
-
Page 24: Fit Remote Display
INSTRUCTION MANUAL TPMS FIT 6.2.3 FIT REMOTE DISPLAY DISPLAY Once the tyre pressure sensors are connected, you can display the current values in the Pressure gauge (Selection screen page 2). Pressure gauge for front and rear wheel. The following warning will be shown on the display if tyre pressure falls below the mini- mum level. - Page 25 INSTRUCTION MANUAL TPMS FIT The tyre pressure ranges and the pressure unit can be adjusted in the tyre pressure sub- menu. You can use the selector button (right/left) to change the pressure unit between psi and bar. Press on the selector button to save the selected setting.
-
Page 26: Cleaning And Servicing
INSTRUCTION MANUAL TPMS FIT 7 CLEANING AND SERVICING 7.1 BASIC CLEANING 7.1.1 CLEANING THE TYRE PRESSURE SENSOR INFO-CIR NOTICE Never clean the tyre pressure sensor with solvents, such as oil, thinners, alcohol or corrosion pro- tection. The tyre pressure sensor is protected against temporary immersion in water. Never immerse the tyre pressure sensor in water for a longer period of time. -
Page 27: Troubleshooting, Fault Clearance And Repair
INSTRUCTION MANUAL TPMS FIT 8 TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR 8.1 TROUBLESHOOTING AND FAULT CLEARANCE 8.1.1 TYRE PRESSURE IS NOT DISPLAYED The tyre pressure sensors switch to a power-saving mode if the e-bike is not being moved. For this reason, you must move the e-bike first until the tyre pressure is displayed (rotate wheel 180°). -
Page 28: Recycling And Disposal
INSTRUCTION MANUAL TPMS FIT 9 RECYCLING AND DISPOSAL 9.1 DISPOSAL Mechanical and electrical devices, accessories and packaging should be taken for recycling in compliance with environmental standards. Do not dispose of them in the household waste. For EU countries only: According to the European Directive 2012/19/EU, 2006/66/EC and their implemen-...
Need help?
Do you have a question about the 501105 and is the answer not in the manual?
Questions and answers