Advertisement
Quick Links
DR7800S DR7810S DR7600S DR7610S DR7500S DR7510S
Thank you for purchasing a COVALUE two‐way radio. This simple to use radio adopts the latest
advances in technology, providing reliable communication in today's demanding communication
environment.
Notice to the User:
· Please read this instruction manual before operating this radio.
· It's prohibited to use the radio or charge it at any area with a potentially explosive atmosphere
(where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while
parking at a gasoline service station; or any area where radio communication is prohibited
(such as a hospital or a airport.)
· It's prohibited to operate the radio without permission in areas where the government laws
prohibit radio communication.
· Please don't expose the radio to direct sunlight for a long time; don't place the radio near any
heating devices, either.
· Please don't put the radio in extremely dusty, moist humid areas or unstable surfaces.
· Only qualified personal, with proper tools and instruments are allowed to service and repair
the radios, do not disassemble the radio by yourself to avoid damages.
FCCWarning：
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference , and (2)
this device must accept any interference received , including interference that may
cause undesired operation .
Note: This equipment has been tested and found to comply with the limits for a Class
B digital dev
ice, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Instruction Manual
DMR/FM Portable Radio
Advertisement
Related Manuals for Covalue DR7800S
Summary of Contents for Covalue DR7800S
- Page 1 Instruction Manual DR7800S DR7810S DR7600S DR7610S DR7500S DR7510S DMR/FM Portable Radio Thank you for purchasing a COVALUE two‐way radio. This simple to use radio adopts the latest advances in technology, providing reliable communication in today’s demanding communication environment. Notice to the User: · Please read this instruction manual before operating this radio. · It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere (where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while ...
- Page 2 When worn on the body, always place the radio in a COVALUE approved holder, holster, case, or body harness or by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which exceed the FCC's occupational/controlled environmental RF exposure limits.
- Page 3 étui, un étui ou un harnais de sécurité approuvé par COVALUE ou utilisez le clip approprié pour ce produit. L'utilisation d'accessoires non approuvés peut engendrer des niveaux d'exposition supérieurs aux limites d'exposition aux RF professionnelles / environnementales...
-
Page 4: Digital Portable Radios
PROFESSIONAL DIGITAL TWO‐WAY RADIO DR7800S SERIES DR7800S/7810S/7600S/7610S/7500S/7510S DIGITAL PORTABLE RADIOS QUICK REFERENCE GUIDE DR7800S SERIES Digital Portable Radios Quick Reference Guide NOTE: Refer to User Guide for more details on your radio's operations/features. Radio Controls Full Keypad Radio Limited Keypad Radio ... - Page 5 Non‐Keypad Radio Record your radio’s programmable button functions in the blanks provided. SP represents short press, LP represents long press. ①Channel Selector Knob ...
- Page 6 ②On/Off/Volume Control Knob ③LED Indicator ④Side Button 1 (Programmable) SP: __________ LP: ___________ ⑤Push‐to‐Talk (PTT) Button ⑥Side Button 2 (Programmable) SP: ____________LP: ___________ ⑦Side Button 3(Programmable) SP: ___________ LP: ___________ ⑧Front Button P1 (Programmable) SP: ___________ LP: ___________ ⑨OK/Menu Button ⑩2‐Way Navigation Button ○ 11 Keypad ○ 12 Return/Home Button ○ 13 ．Front Button P2 (Programmable) SP: ___________ LP: ___________ ○ 14 ．Display ○ 15 ．Microphone ○ 16 ．Speaker ○ 17 ．Universal Connector for Accessories ○ 18 ．Emergency Button (Programmable) ○ 19 ．Antenna ...
- Page 7 Battery The number of bars (0 – 3) shown indicates the charge remaining in the battery. Bluetooth The Bluetooth feature is enabled but there is no remote Bluetooth device connected. Bluetooth Connected The Bluetooth feature is enabled. The icon stays lit when one or more remote Bluetooth devices are connected. Scanning Scan land on Scan feature is enabled. Encryption Enable The Privacy feature is enabled. GPS Available The GPS feature is enabled. The icon stays lit when a position fix is available. GPS Not Available/Out of Range The GPS feature is enabled. The icon stays lit when a position fix is available. Accessories Connected Power Level Radio is set at Low power. ...
- Page 8 The following icons appear during a call, and in the Contacts list to indicate ID type. Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Group Call/All Call Indicates a Group Call or All Call in progress. In the Contacts list, it indicates a group alias (name) or ID (number). ■ Bluetooth Device Found List Bluetooth Audio Device Bluetooth‐enabled audio device, such as a headset. ■ Sent Items Icons The following icons appear at the top right corner of the radio’s display in the Sent Items folder. Sent Successfully Send Failed •The text message to a subscriber alias or ID is pending transmission, followed by waiting for acknowledgement. Or •The text message to a group alias or ID is pending transmission. ...
-
Page 9: Adjusting The Volume
■ Adjusting the Volume To increase the volume, turn the On/Off Volume Control Knob clockwise. To decrease the volume, turn this knob counterclockwise. ■ Accessing the Radio from Password 1. Power up the radio. 2. You hear a continuous tone. 3. Enter your current six‐digit password with the radio’s keypad. The display shows ****** . Press OK to proceed. You hear a positive indicator tone for every digit pressed. Press to remove the each * on the display. 4. If the password is correct: Your radio proceeds to power up. See Powering Up and Turning Off the Radio part OR If the password is incorrect: The display shows Password Input Error. Repeat Step 3. ■ Selecting a Zone A ... - Page 10 OR You hear a negative indicator tone, indicating the radio has switched from Zone 2 to Zone 1. ■ Selecting a Channel Once the required zone is displayed (if you have multiple zones in your radio), turn the programmed Channel Selector Knob to select the channel. ■ Making a Group Call 1. Turn the Channel Selector Knob to select the channel with the active group alias or ID. 2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3. Press the PTT button to make the call. The LED lights up solid red. The Group Call icon appears. The first text line shows the group call alias. 4. Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. OR Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the microphone. 5. Release the PTT button to listen. When the target radio responds, the LED lights up green. You see the Group Call icon, the group alias or ID, and transmitting radio alias or ID on your display. 6. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7. Radio returns to the screen you were on prior to initiating the call. ...
- Page 11 Press the programmed One Touch Access button and proceed to Step 5. OR Follow the procedure below. 1. to access the menu. 2. or to Contacts and press to select. 3. or to the required subscriber alias or ID and press to select. OR or to Manual Dial and press to select. Enter the subscriber ID you want to page and press . ： NOTE Not applicable for Limited Keypad Radio 4. ...
- Page 12 4. or to the required Quick Text and press to select. 5. A blinking cursor appears. Use the keypad to edit the message, if required. Press to move to the left. Press to move to the right. Press the *DEL key to delete any unwanted characters. Press the # key to input one space to the right. 6. Press once message is composed. 7. or to the required alias or ID and press to select. OR or ...
- Page 13 If the message is not sent, a low tone sounds and the display shows negative mini notice. □ Non‐Keypad Radio You can send Quick Text messages, programmed by your dealer, via the programmable button. 1. Press the programmed One Touch Access button to send a predefined Quick Text message to a predefined ID. 2. The LED lights up solid red. 3. Two chirps indicate that the message is sent successfully. OR A low‐pitched tone indicates that the message cannot be sent. ■ Sending an Emergency Alarm NOTE: If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode. 1. Press the programmed Emergency On button. 2. The display shows Tx Alarm and the destination alias. The LED blinks red and the Emergency icon appears. OR The display shows Tx Telegram and the destination alias. The LED blinks red and the Emergency icon appears. 3. When an Emergency Alarm acknowledgment is received, the Emergency tone sounds and the LED lights off. The display shows Alarm Sent. ...
- Page 14 4. or to My Devices and press to select. If you could not see “My Devices”, you could turn on “BT Switch” to get it. 5. or to the required device and press to select. OR or to Search Devices to locate available devices. or to the required device and press to select. 6. or to Connect and press ...
Need help?
Do you have a question about the DR7800S and is the answer not in the manual?
Questions and answers