Description; Features; Front Panel Tga-50R - Dimavery TGA-50 Manual

4. DESCRIPTION

4.1 Features

Vintage design 12" tube amplifier
• 3-band-equalizer for fine-tuned sound
• Two independent channels with separate volume and effects controls
• 4/8/16 Ohm speaker out
• Standby mode
• Rotary control: Volume, Drive, Drive Volume, Treble, Bass, Middle, Reverb, Presence
• Frequency-corrected stereo line output for recording and live applications
• Insert facility for external effects devices
• 3 x 12AX7 Tube Pre-Amp
• 2 x EL34 Tube Amp
• 12" loudspeaker
• Rugged housing with plastic corners
• Colour: goldbrown

4.2 Front panel TGA-50R

1. INPUT Socket
Here, you can connect your guitar via balanced 1/4" stereo jack.
2. GAIN Control CH.A
This control determins the degree of distortion of channel A.
3. GAIN Control CH.B
This control determins the degree of distortion of channel B.
4. TREBLE Control
Used to boost or lower the upper frequency range.
5. MIDDLE Control
Used to boost or lower the midrange frequencies.
6. BASS Control
Used to boost or lower the LOWs.
7. PRESENCE Control
Used to cut or boost the higher midrange frequencies.
8. REVERB Control CH.A
With the reverb control you can can gradually add reverb to channel A.
9. VOLUME Control CH.A
With the Volume control, you can adjust the output signal of channel A.
10. REVERB Control CH.B
With the reverb control you can can gradually add reverb to channel B.
11. VOLUME Control CH.B
With the Volume control, you can adjust the output signal.
12. PUSH ON Button with LED
Press this button to select channel B. When CH.B is on, the corresponding LED lights up.
13. FOOTSWITCH Socket
Used to connect your footswitch via a stereo plug.
26362050_V_1_0.DOC
17/20