Aire Mate100 G User Manual

Ble pendant

Advertisement

Quick Links

AIRE Mate100 G User
Document Title
Version
Finale Date
Status
Document Control ID
BLE Pendant
Manual
Revision: 1.00
AIRE Mate100 G User manual
1.00
2020-05-26
Released
Pendant AIRE Mate100 G
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mate100 G and is the answer not in the manual?

Questions and answers

Summary of Contents for Aire Mate100 G

  • Page 1 BLE Pendant AIRE Mate100 G User Manual Revision: 1.00 Document Title AIRE Mate100 G User manual 1.00 Version Finale Date 2020-05-26 Status Released Document Control ID Pendant AIRE Mate100 G...
  • Page 2 Contents 1 Introduction ............................ 3 2 Product Overview .......................... 3 2.1 Appearance .......................... 3 2.2 Buttons Interface Description ..................... 3 2.3 LED Description ......................... 4 3 Getting Started ..........................4 3.1 Parts List ..........................4 3.2 Built-in Battery ........................5 3.3 AIRE100V Base station ......................
  • Page 3 1 Introduction AIRE Mate100 G is a BLE Pendant which is designed as accessory for Emergency call BLE protocol will report Beacon broadcast data by custom equipment. It works on protocol After the SOS button being long press for 3 seconds. The AIRE100V device which receiver the Beacon broadcast will dial a emergency call.
  • Page 4 2.3 LED Description Figure 1-2 There are 3 LED lights in AIRE Mate100 G device, the description as following. Light Event State RED LED Normal Dark Power on Solid for 1 second SOS key was long pressed for 3 seconds...
  • Page 5  There is a button battery(CR2450) integrated in device. The Pendant will automaticly power on when the button battery is assembled . Note: If the AIRE Mate100 G device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.
  • Page 6 Figure 2-1 3.4 Power on/Power off Figure 2-2 Power on:  The Pendant will automaticly power on when the button battery is assembled . Power off:  UnPlugged the button battery. Note: the user can change the button battery when the battery is dead. 4 Frequency BLE:2402-2480MHz...
  • Page 7 Too high temperature will damage the device or even cause the battery explosion.  Please do not use AIRE Mate100 G on the airplane or near medical equipment. FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
  • Page 8 §15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents