Hawking Net-Talk HNT1A Quick Installation Manual page 10

Get Started with the HNT1A Phone
1. Check that you are connected to the Internet. Launch Skype and log in
to Skype. Add in contact information if you haven't done so. (See the
User's Manual for instruction to add contact)
2. Make sure the API is active before using the USB phone. If not,
double-click the API icon on the desktop.
3. Connect the USB phone to your computer. The LCD backlight will turn
on and the device will start to connect to the installed API. The HNT1A
will trying to establish a connection (a) the LCD screen will light up in
Blue and display USB Phone Ver 1.2b* Connecting. After the HNT1A
is connected, (b) Hawking Technologies will appear on the HNT1A LCD
screen.
a.
*Note: Actual version depends on your USB phone.
Note: If Connecting... keeps showing on the display, the API is not
active. Make sure to launch the API for the USB phone to communicate
with Skype.
4. Verify if the Skype is using the HNT1A as its audio and microphone
devices, select Skype > Preference > Audio. Make sure to select USB
Audio Device as the audio output and input device.
5. You can now start using the HNT1A with Skype.
b.
10