Murphy TV26RN20D Instruction Manual

Digital lcd television

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Instruction manual

DIGITAL LCD TELEVISION

Before operating the unit, please read this manual thoroughly.

If you experience any difficulties or would like further assistance, please contact our Helpline

on 020 8236 9090.

Please Note: This is for operating problems and NOT for Service or Technical enquiries.

35Q0901A.indd 1

TV26RN20D

TV32RN20D

This instruction booklet covers both of the above models.

4/9/08 12:08:14 PM

Table of Contents

Need help?

Do you have a question about the TV26RN20D and is the answer not in the manual?

Questions and answers

Ravi Gadekar

July 11, 2025

my tv is murphay 32 inch and on the alline mode, colour changing, remotely not working for and there not tv power botton in tv

Summary of Contents for Murphy TV26RN20D

Page 1 Instruction manual DIGITAL LCD TELEVISION TV26RN20D TV32RN20D This instruction booklet covers both of the above models. Before operating the unit, please read this manual thoroughly. If you experience any difficulties or would like further assistance, please contact our Helpline on 020 8236 9090.
Page 2 Safety warnings Damage - Never use your TV Ventilation Attention! if it is damaged in any way. The TV must be well ventilated. Cleaning instructions for your LCD TV. Always place your TV on a ﬂ at Do not cover your TV or place Safety note: level surface inside a small conﬁ...
Page 3: Table Of Contents
Moving the unit or carrying by hand When the unit is moved a long way, unplug the power cord and disconnect the aerial, connecting leads and any fall-prevention apparatus. • Moving without doing so could result in damage to the power cord, a ﬁ re, electric shocks or injuries from dropping the unit.
Page 4: Location Of Controls
Location of controls Left Side Front Side * Illustration of TV32RN20D Description of Indicators and Controls 1. Remote sensor (Standby/Timer/On) indicator: The LED indicator lights up red in standby mode, orange in standby mode when the timer is activated, and green in the power ON mode. 3.
Page 5: Aerial Connection
Aerial connection Note: Before you connect other appliances: • To avoid potentially damaging your set, make sure all items are switched off and disconnected from the mains power when you make the connections. • Arrange the desired connection. • When you have ﬁ nished making the connections, reconnect the mains power to the unit and switch it back Connect your aerial as shown below (C).
Page 6: Auto Setup
Auto setup Preparation: Your unit has an Automatic Press (Power) on the unit or press (On/Standby) on the remote. installation which makes installation in your unit easy. When you turn on AUTO INSTALLATION the unit for the ﬁ rst time, LANGUAGE AUTO INSTALLATION menu will appear.
Page 7: Quick Guide For Analog Menu Operation
Quick guide for ANALOG MENU operation/Selecting the video input source/On-screen Language Selection Quick guide for ANALOG MENU operation Make sure the aerial connection and power Call ANALOG MENU and for example: Select AUTO TUNING. supply are connected as per the description on previous page.
Page 8: Automatic Station Presetting With The Built-In Tuner
Automatic station presetting with the built-in Tuner/Changing the order of stored channels Automatic station presetting with the built-in Tuner Perform this feature to search for and store new analogue TV programmes after the Automatic installation (page 4). Preparation: Make sure your aerial is connected to the aerial input (see page 3). Select ATV (see page 5).
Page 9: Manual Tv Station Presetting
Manual TV station presetting If you like, you may manually tune a certain station into a selected program position, without deleting or modifying other program position’s contents. Example: Store the BBC 2 into program position 2. Preparation: connect analog rf-cable-supply. Select ATV (see page 5). Select program position 2.
Page 10: Basic Tv Function
Basic TV function Channel selection With the numbered buttons. Example: • No. 2: Press 0 and within 2 seconds, press 2. • No. 29: Press 2 and within 2 seconds, press 9. Press P + or – to change up or down a channel. This takes approx. 2 seconds.
Page 11: Teletext
Teletext Teletext is sent page by page. This unit is able to automatically store up to 256 pages, but they can only be accessed once they have been stored. This can take a few moments. Fastext/TOPtext The Fastext/TOPtext is teletext with a special directory. On the lower part of the screen there are four different coloured ﬁ...
Page 12: Stereo Reception With The Built-In Analogue Tuner
Stereo reception with the built-in analogue tuner NICAM stereo sound reception: The built-in Tuner can detect and receive NICAM stereo broadcasts NICAM AUTO automatically. Select NICAM, then press ENTER. BASS Press B or A to select AUTO or OFF. TREBLE Select OFF if you do not want to receive NICAM sound.
Page 13: Picture Format
Picture format The broadcaster may transmit a Wide Screen Signalling (WSS) signal which can determine the correct picture width and set it automatically when the AUTO setting is used. If you want to change this setting, you can select from the formats listed below. AUTO Press PICTURE SIZE repeatedly until AUTO appears.
Page 14: Other Convenience Functions
Other convenience functions You can change the default settings to convenience use. Icon Selected Items Setup hint PICTURE SPORTS Bright and dynamic picture (factory-set) PREFERENCE STANDARD Standard picture quality (factory-set) MOVIE Movie-like picture setting (factory-set) MEMORY Your personal preferences BRIGHTNESS / CONTRAST You can adjust the picture to your preference.
Page 15: Guide To Using The Digital Menu System
Guide to using the Digital Menu system Preparation When the set is in the Press TV/DVB-T to select the digital TV mode. digital mode, you can access the main menu by pressing DIGITAL MENU on the remote control. Press DIGITAL MENU to Installation System Configuration This main menu contains...
Page 16: Language Setup
Language Setup/Auto Scan Language Setup/Auto Scan Preparation: Switch on appliance. Press TV/DVB-T. The appliance switches over to DVB-T-mode Press DIGITAL MENU, the menu will appear on the screen. Texd Press B or A to select Language Setup Language Setup option, then press ENTER. Language Setup Language Setup menu will appear.
Page 17: Manual Scan
Manual Scan/Carrier Setup Manual Scan With the Manual Scan option, you can tune one carrier at a time, by entering the carrier parameters manually. Texd Press C or D to select “Manual Scan”, then Auto Scan press ENTER. Manual Scan Carrier Setup You can choose the carrier number from Manual Scan...
Page 18: Channel Organizer
Channel Organizer The Channel Organizer feature provides options Texd to organise the channels. Press B or A to select Channel The following options Organizer option, then press ENTER. Channel Organizer are supported: Favourite, Lock, Skip, Go To, Delete, Rename, Move, Move To, S.No Service Name Fav Lock Skip Del Move View.
Page 19 Channel Organizer Setting details None Assign services to four different favourite groups. ① Press C/D to select the desired service. Fav1 ② Press 1 on the remote control. A selection box displays. ③ Press C/D to register the selected service to any of the four favourite groups (None, Fav1 Fav2 Fav * ...
Page 20: Display Setup
Display Setup/Password Setup (Parental lock) Display Setup Main menu System Configuration Texd Press C or D to select “Display Setup”, then Display Setup press ENTER. assword Setup Subtitle Display Setup menu will appear. Press C or D to select the item you want to change. Then you can change each setting by pressing B or A.
Page 21: Version
Version/Software Upgrade/Common Interface Version You can check the software and hardware versions. Main menu Technical Information Texd Press C or D to select “Version”, then press ENTER. Version Software upgrade The hardware and software versions are displayed. Software Upgrade Software Upgrade allows you to download the latest software available on the Engineering channel.
Page 22: Channel List
Channel list/Channel banner Channel list Channel group Zoom window Press CH LIST to Channel group display the Channel list menu. S.No Services BBC ONE Carrier BBC TWO DVB-T 64 QAM BBC THREE List of the Tuning CBBC Freq services 177500 kHz parameters BBC News 24 BBCi...
Page 23: Multi Audio
Multi audio/DVB-Subtitle Multi audio You can select your preferred Audio mode and DVB (digital TV) subtitle Language. The Multi audio menu will display the Audio mode and Language options available with the current broadcast. Multi audio Audio mode Stereo Press AUDIO I/II to display the Multi Language Code audio menu.
Page 24: Epg (Electronic Program Guide)
EPG (Electronic Program Guide) The Guide menu shows the available programme listings for the next 8 days Press GUIDE to display the Guide menu. only, including today. However, the guide menu Guide 16:50 Sun 20/08/2007 will show “No Event Programme 16:30-17:00 The Wild Thornberrys CBBC Name”...
Page 25: Epg Timer
EPG Timer You can choose whether or not the screen switches on when the timer event begins - please see page 12 (Rec screen status (LCD Power on/off)). This is so that if you are using the timer to make a recording to your VCR or other device, the TV screen will not switch on unless you want it to.
Page 26: Pc Connection
PC connection As PCs are sometimes supplied with a “conventional” CRT monitor, you may need to adjust the display settings of your PC’s graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor) - select “1280 x 768” for the screen resolution, and select 60 Hz for the on- screen refresh rate.
Page 27: Connecting An Hdmi Or A Dvi Device To The Hdmi Input
Connecting an HDMI or a DVI device to the HDMI input The HDMI 1 input receives digital audio and uncompressed video from a HDMI equipped device or uncompressed digital video from a DVI equipped device. When you connect the HDMI 1 to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it is necessary to use separate analogue leads to transfer the audio signals.
Page 28: Connection To Other Equipment
Connection to other equipment 1. Connecting to other equipment Attention: Preparation: • Disconnect all equipment from the AC-supply, to prevent any possible damage. • Make the necessary connections. • Make sure all connections are safe & secure before reconnecting your equipment the AC-supply. Pls connect your satellite-receiver or DVD player via SCART.
Page 29 Connection to other equipment 3. Connecting an audio system This connection allows you to hear the TV sound through external speakers connected to an audio ampliﬁ er. To control the audio through the ampliﬁ er turn on the TV and the ampliﬁ er set the volume of both to a moderate level, and turn off the TV’s built-in speakers (see “SPEAKERS”...
Page 30: Av Colour Adjustment
Connection to other equipment 6. Setting of SCART socket , select AV1 INPUT or AV2 INPUT, then press ENTER. Selecting the “AV1 INPUT” or “AV2 INPUT” type - this ensures that the TV processes the SLEEP TIMER input signal correctly. AV1 INPUT Press B or A to select AV, S-VIDEO or RGB.
Page 31: Fault Fi Nding Guide
Fault ﬁ nding guide Symptom Cause Solution TV does not operate. Internal error may occurs. Unplug the unit for 1 minute, then plug it back in. No standby light. Is your TV plugged in? Plug your TV into main socket outlet.
Page 32 Fault ﬁ nding guide Symptom Cause Solution Remote control does not work or Weak or exhausted batteries. Replace the batteries. operates erratically. Batteries placed in the wrong way. Check that you have put the batteries in the remote control the right way around.
Page 33: Scart Socket Information
15. Red input 16. Fast blanking input 17. Video earth 18. Earth 19. Video output 20. Video input 21. Socket screening TV26RN20D TV32RN20D Colour System: PAL, SECAM Broadcasting System: Analogue: UK, IR, CCIR, FRENCH System, B/G, D/K, I/I, L Digital: DVB-T (OFDM 2k/8k 16QAM/64QAM) AV Input receivable: NTSC 3.58, NTSC 4.43/PAL 60)
Page 34 After Sales Service Whilst this products have been designed and manufactured to a very high standard and have been subjected to rigorous quality control, regrettably problems can sometimes occur. In the unlikely event of a manufacturing defect occurring during the ﬁ rst twelve months of ownership, your dealer, Mail Order or Catalogue Company, from whom you purchased the product, will arrange for free-of-charge service to be carried out.

This manual is also suitable for:

Tv32rn20d