MGT RAM 65H Technical Manual

Tamping rammer

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

MENEGOTTI TECHNICAL MANUAL

TAMPING RAMMER

RAM 65H

Attention:

Before operating the Menegotti equipment, read

this technical manual, it will inform and instruct

the operator about the operation of the product.

This way, you avoid possible work accidents and

premature equipment maintenance.

Table of Contents

Need help?

Do you have a question about the RAM 65H and is the answer not in the manual?

Questions and answers

Summary of Contents for MGT RAM 65H

Page 1 MENEGOTTI TECHNICAL MANUAL TAMPING RAMMER RAM 65H Attention: Before operating the Menegotti equipment, read this technical manual, it will inform and instruct the operator about the operation of the product. This way, you avoid possible work accidents and premature equipment maintenance.
Page 2: Table Of Contents
Congratulations on purchasing a Menegotti product! Summary With the highest quality, designed and built especially to serve you with technology to suit your needs. The Company This manual was written to provide you with the information and The Product instructions necessary for the use and maintenance of our equipment, Safety as well as to present you with data relating to its technical characteris- Technical Speciﬁcations...
Page 3: The Company
• ALWAYS use common sense and caution when operating rammer. • In case of damage or missing parts, contact MGT North America on our telephone number 770 9107450 for replacement. • With the machine turned oﬀ, conduct a daily inspection of the machine's parts. In case of problems, immediately contact Mengotti's authori-...
Page 4 • ALWAYS be sure that all other persons are at a safe distance from the rammer. Stop the machine if people step into the working area of the machine. • ALWAYS guide the rammer in such a way that the operator is not squeezed between the rammer and solid objects. Special care is required when working on uneven ground or when compacting coarse material.
Page 5: Technical Specifications
• ALWAYS do Periodic Maintenance as recommended in Operator’s Manual. • ALWAYS replace worn or damaged components with spare parts designed and recommended by Menegotti for servicing this rammer. Technical Speciﬁcations Components TECHNICAL DATA RAM 65H COMPONENTS Fuel Tank Cap Weight (Lb) 143,3...
Page 6: Working Operation
Working Operation • This equipment can only be used for its proper application and by trained 6 - Check every bolt, nut or screwed area for tightness. Loosened due to operators. vibration may result inunexpectedly serious trouble. Be sure to tighten any •...
Page 7: Starting Up For Equipment
Starting up for Equipment 1 - Turning the choke level to open the choke. Running the engine for 5 minutes at low speed to warm the engine. 2 - Move the throttle level quickly to the “FULL OPEN” position. DO NOT move the throttle level slowly as this may cause damage to the clutch or spring. CAUTION: Operating the rammer at less than full speeds can result in damage to the clutch springs or foot.
Page 8: Transportation
Cleaning 1 - Shutdown engine for transportation. Cleaning the RAM 65H engine air ﬁlter (Honda GXR120 engine) 2 - For transportation, tighten fuel tank cap securely and close fuel cock to 1 - Remove the two screws and the air ﬁlter cover. Then, remove the air ﬁlter prevent fuel from spilling.
Page 9: Equipment Maintenance
Equipment Maintenance Periodicity: Perform at each indicated operating interval (h) Periodic Maintenance Schedule Items Daily After 5h Every 25h Every 100h Every 300h Check fuel level Check oil level of machine Check fuel line and ﬁttings for cracks or leaks Tighten ramming shoe hardware.
Page 10 Diﬃcult to start ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Ignition plug being bridging? Check ignition system. Carbon deposit at ignition? Clean or replace ignition. Fuel is available but spark plug will not ignite (power available at high tension code) Short circuit due to deﬁcient insulator? Replace insulators.
Page 11: Product Warranty
Product Warranty Warranty Term By the present CERTIFICATE provided from original purchaser, Menegotti The warranty is not transferable under the conditions and within the guarantees this product against manufacturing defects, for a period of 12 prescribed period and will be valid from the date of purchase of the (twelve) months, being: the ﬁrst 3 (three) months of legal guarantee, and equipment, through presentation of the sales invoice to the ﬁrst end the last 9 (nine) months a special warranty guaranteed by Menegotti,...