Package Contents; Getting Started - XtremepowerUS 42CC Owner's Manual And Safety Instructions

PACKAGE CONTENTS

Your motorcycle romes with the following items in the box. Please locate all of the following:
1. Motorcycle
2. Tool Kit
3. Product Handbook

GETTING STARTED

Assembling
1. Open the carton, take out of the motorcycle.
2. Setting up handle bar.
handle bar in comfortable position and tighten the bolts.
Fueling
This is a 4-stroke engine.
PROCEDURES BEFORE FUELING. Make sure that the engine is off.
2. Slowly open the GAS CAP. so that possible over-pressure disappears.
3. Clean the tank cap area to make sure that it is free from excess dirt and debris. Make sure
that no dirt falls into the gas tank.
4. After fueling, replace the GAS CAP and tighten.
Starting - Pull Start
Move at least 10 feet away from where you filled up the gas.
1. Set the CHOKE LEVER to the CHOKED {UP) position.
2. Pull the RECOIL STARTER briskly. making sure to hold the handle in your grasp.
Note: Do not allow it to snap back, let it back slowly. You may want to give it a little throttle by gently
squeezing the GAS LEVER.
3. It may be necessary to repeat step 6 several times until the motor starts.
When starting the motorcycle for the first time, it may be necessary to pull the starter handle multiple
times until it starts.
Take out the aluminum block from the tool bag. Set up the
Only run the engine using gasoline >#90. PLEASE READ OPERATING
£�
� ..
4
- �
: i
'
�
��'.