Product is certified to CE standard and complies to all relevant CE-standards, as well as RoHs standard. User Guide: Eupry Wi-Fi Data Logger Rev. 0.8 - May 2021 Page 2 of 12 Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ | +45 53 51 77 00 | support@eupry.com...
12.3 What if the Wi-Fi Data Logger has been damaged in any way? 13 Support 14 Revision history User Guide: Eupry Wi-Fi Data Logger Rev. 0.8 - May 2021 Page 3 of 12 Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ | +45 53 51 77 00 | support@eupry.com...
4 Introduction The following is a manual for the wireless Eupry Wi-Fi data logger. The unit works with Eupry’s online logging software, and all data can be viewed on the online platform alone. 5 Specifications 5.1 Temperature Data Logger - DW1T, DW1ST...
From 30 seconds to 4 minutes (resolution of 1 second) and from 5 minutes to 15 minutes (resolution of 1 minute), depending on software package User Guide: Eupry Wi-Fi Data Logger Rev. 0.8 - May 2021 Page 5 of 12 Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ | +45 53 51 77 00 | support@eupry.com...
6.1.1 Network requirements Network supports 2.4Ghz. The router is DHCP enabled. The Eupry Wi-Fi Data Logger should be within 1 meter of the phone which is being used to set it up. There are free IPs on the network. 6.1.2 Video Guide Following our video guide is the easiest way to connect your Wi-Fi data logger(s).
Page 7
User Guide: Eupry Wi-Fi Data Logger Rev. 0.8 - May 2021 Page 7 of 12 Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ | +45 53 51 77 00 | support@eupry.com...
Wi-Fi icon blinks red. If the end of transportation flag is correctly set, the Wi-Fi icon will then blink yellow 3 times. User Guide: Eupry Wi-Fi Data Logger Rev. 0.8 - May 2021 Page 10 of 12 Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ | +45 53 51 77 00 | support@eupry.com...
Eupry’s system. 11 Cleaning guide It is possible to clean the Eupry Wi-Fi Data Logger, if the device gets contaminated or before sending the device back to Eupry. We recommend using soap for removing visible stains and alcohol for disinfection.
Contact your service supplier for a replacement. 13 Support Please visit the Eupry Support Centre for any support enquiries. This can be accessed by selecting the “Support” button when logged in to the Eupry Logger. Alternatively, please contact support using the information provided in the footer.
Need help?
Do you have a question about the DW1T and is the answer not in the manual?
Questions and answers