Advertisement
Quick Links
CAPA– LOCKS
USER INSTRUCTION
Digilock Mech
MANUAL CODE LOCK:
Factory default code is 0-0-0-0
Assign a User Code and operate:
To Lock:
1.
Make sure the knob is in the
2.
Close the door.
3.
Set any 4-digit code.
4.
Turn the knob to the
5.
Scramble the code.
To Unlock:
1.
Enter your 4-digit code.
2.
Turn the knob to the
3.
Open the door.
4.
Scramble the code.
Operate with the Manager Key
1.
Insert the Manager Key.
2.
Turn the knob to the
3.
Open the door.
Note: If opened in error, use the Manager Key to turn the lock to the
position. The original code will continue to operate the lock. If the
code is forgotten, follow the Reset Instructions to make the lock
available for another user.
Reset Instructions
1.
Insert the Manager key.
2.
Turn the knob to the
3.
Remove the Manager Key.
4.
Insert the Reset Tool.
5.
Push in the Reset Tool and simultaneously turn all dials until it
stops.
6.
The final code displayed is the current code.
7.
Turn the knob to the
More info:
https://www.digilock.com/support/mech/
position.
position.
position.
symbol.
position.
position.
Advertisement
Summary of Contents for Martela CAPA
- Page 1 CAPA– LOCKS USER INSTRUCTION MANUAL CODE LOCK: Factory default code is 0-0-0-0 Assign a User Code and operate: To Lock: Make sure the knob is in the position. Close the door. Set any 4-digit code. Turn the knob to the position.
- Page 2 CAPA– LOCKS USER INSTRUCTION DIGITAL CODE LOCK: GETTING STARTED GUIDE Digilock Versa Mini...
- Page 3 CAPA– LOCKS USER INSTRUCTION DIGITAL CODE LOCK: GETTING STARTED GUIDE Digilock Versa Mini...
- Page 4 CAPA– LOCKS USER INSTRUCTION DIGITAL CODE LOCK: Digital code locks are operated by a 4-7 digit User Code. Manager Keys provide management access and external power. Programming is accomplished via a Programming Key unique to the lock system. Set Lock Functionality Digilock Versa Mini Each lock can be set for either shared or assigned use functionality.
- Page 5 CAPA– LOCKS USER INSTRUCTION DIGITAL CODE LOCK: Operating Instructions - In Shared Use Functionality In shared use functionality, the user enters any 4-7 digit User Code to lock and the same User Code to unlock. Once unlocked, the lock is available for a different user.
- Page 6 CAPA– LOCKS USER INSTRUCTION RFID LOCK: GETTING STARTED GUIDE Digilock Versa Mini...
- Page 7 CAPA– LOCKS USER INSTRUCTION RFID LOCK: GETTING STARTED GUIDE Digilock Versa Mini...
- Page 8 CAPA– LOCKS USER INSTRUCTION RFID LOCK: RFID locks are operated by an RFID credential. Manager Keys provide management access and external power. Programming is accomplished via a Programming Key unique to the lock system. RFID standard - Mifare (13.56 MHz)
- Page 9 CAPA– LOCKS USER INSTRUCTION RFID LOCK: Operating Instructions - In Shared Use Functionality In shared use functionality, the user presents any User RFID Credential to lock and uses the same User RFID credential to unlock. Once unlocked, the lock is available for a different user.
-
Page 10: User Instruction
CAPA– LOCKS USER INSTRUCTION RFID HIDDEN LOCK: The lock is controlled using a key card or tag, and the lock’s function can be configured to unique requirements, regardless of whether it is for permanent or temporary storage. RFID standard - Mifare (13.56 MHz) - Page 11 CAPA– LOCKS USER INSTRUCTION RFID HIDDEN LOCK: Changing Functionality/ Mode Note! When changing Mode you always have to change via Mode 1. If the lock is not in Mode 1, reset the lock to Mode 1. Program the desired Mode Example: A change from Mode 3 to Mode 2 means: Mode 3 ->...
- Page 12 CAPA– LOCKS USER INSTRUCTION RFID HIDDEN LOCK: Add users (Mode 1 and 2) To add users you need the programming card and the user cards you wish to add. Place the programming card on the lock. Repeated tones will sound for 7 seconds.
Need help?
Do you have a question about the CAPA and is the answer not in the manual?
Questions and answers