IL Motorsport NC0-0965 Installation Instruction

Figure 1
To fit the front strut, loosen the screws on the point 1 to 5 and remove the original brace
(Figure 1).
When mounting the aluminium strut using the original bolts.
Allen key bolts
Figure 2
Now loosen the screws at position 6-16 and remove the original struts. Once assembled,
attach the rear strut first with the original struts at points 16 and 13 with the supplied bolts.
The rear torque arm is installed under the original strut (Figure 5)
Now take the middle piece (Figure 3) and secure with the new hexagonal bolt M12x1,25 at
position 12 and 15. At points 11 and 14 use the original screws.
© Copyright I.L.Motorsport GmbH Innungstr. 1 50354 Hürth-Gleuel Tel.: 02233 977349
Installation Instruction
Brace Kit
NC0-0965
Figure 3
Seite 1 von 2