The Singing Machine SMC2040 Instruction Manual page 4

Assembly
Not for use with other microphone stands. Only lift unit from bottom base. Use caution
when placing larger-sized devices in holder.
All-in-one assembly
x
Cradle pole
adjustment cap
Height
adjustment cap
v
w
Cradle pole
w
y
Extendable Mic
Stand
— E3 —
1
Insert the Main unit onto the Base,
rotate clockwise to tighten the
unit in place.
2
Lift the rubber cover on the top
of the Main unit. Insert the Mic
stand into the Main unit and rotate
clockwise to tighten it.
3
Untighten cradle pole cap, pull up
on the cradle pole. Retighten cap
to keep in place.
4
Insert then rotate to tighten the
Cradle with Mic holders on the
mic stand.
5
Untighten height adjustment cap
to adjust to a suitable height.
Retighten cap to hold in place