Summary of Contents for Kayakpro SpeedStroke Gym - Kayak
Page 1
ON-BOARD CONSOLE INSTRUCTIONS: OVERVIEW The on-board console provides real time feedback to your performance on SpeedStroke. You have several options that control the information the console displays. These directions describe the different displays and the buttons that control them. In addition, we’ll cover how to connect the on-board console and install batteries.
Page 2
The SpeedStroke comes with several electronic connectors. This is what they do and how they should be connected: The “Phone Jack” (or Lin Plug) -so named because they look like the plug that goes from your phone into the wall socket: There are two of these, one coming from the middle of the SpeedStroke frame and the other from the front- (Flywheel end).
Page 3
The 1/8 inch “male plug coming from the middle of the frame: This is the plug from the heart rate monitor sensor. It plugs into the back of the on- board console, in the 1/8” jack marked “HRT.” (PLEASE NOTE: In order to function, you...
Page 4
KayakPro Heart rate chest belt transmitter or alternatively a Polar Heart Rate transmitter – Please note – only Polar Un-coded models will function. Graphic representation of Console Face/ Front...
Page 5
EXPLAINING THE ONBOARD CONSOLE DISPLAY (See graphic image above). There are five “windows” on the on-board console display, many of which change according to the option selected. To Turn On the Display: Press the red “0/1” button on the top. This is also the “off” button. Once You Turn on the Display: The top uppermost display window flashes.
Page 6
1/8” male jack coming from the middle of the frame into the “HRT” jack on the back of the console. You must also wear a KayakPro Heart rate chest belt transmitter or a Polar Heart Rate transmitter – Please note – only Polar Un-coded models will function.