smania BORALITE Instructions

INSTRUCTIONS
BORALITE BATTERY-POWERED
DRILL

PACKAGE CONTENTS

•
Charger
•
34-piece bit set
•
2× battery pack
•
Battery-powered drill
•
Case

TECHNICAL SPECIFICATIONS

•
Chuck design: keyless
•
Chuck size: 0.8–10 mm
•
No-load RPM: 0–350 / 0–1450
•
Rated torque: 36 Nm
•
Battery type: Li-ion
•
Battery capacity: 2000 mAh
•
Battery voltage: 21 V
•
Battery charging temperature: 10–40 °C
•
Charger adapter input: 100–240 V
•
Charging time: 1–2 hours

COMPONENTS

1. Keyless chuck
2. Torque selector
3. Speed change switch
4. LED work light
5. Rotation switch and switch lock
6. ON/OFF switch
7. Battery pack
8. Charger

HOW TO USE

CHARGING THE BATTERY PACK

1. Plug the charger into the wall socket.
2. Plug the power connector of the charger into
the charge socket on top of the battery pack.
•
Once the battery is completely charged, a
green light on the mains adapter lights up.
•
The device cannot be operated during
charging.
•
The charger and the battery heat up during
charging. This is due to operating conditions
and not a defect.
3. Once the device has finished charging,
disconnect the charger from the battery charge
socket and the plug from the wall socket.
Charge state Indicator light state
Charger plugged into Green on, red off
mains
Charging Green off, red on
After charging Green on, red off
Battery abnormal Green and red flicks
Battery temperature Green off, red flick
below 10 °C or over 40 °C

INSTALLING A BATTERY PACK

CAUTION:
•
Always switch off the tool before installing or
removing the battery pack.
•
Hold the device and the battery pack firmly
when installing or removing the battery pack.