Contour Genie Quick Start Manual

NEED HELP? CONTACT US!
Reach out to our Customer Care Team if you have
any questions or concerns.
Phone:
800-950-0230 or 704-944-2800
Email:
customerserv@contourliving.com
O ce & Live Chat Hours:
Mon. - Fri., 8:30 am - 5:00 pm ET
Inflatable
Air Bladder
Hose
Electric
Air Motor
Hand Held
Remote

HOW TO SET UP YOUR MATTRESS GENIE

Slide mattress 2 feet toward the foot of the
bed
1. Place Bladder on the Bed
Slide mattress about 2 feet toward
Place air bladder at head of bed and slide
foot of the bed. mattress over it
Place air bladder at head of bed
and slide mattress on top of it.
2. Attach and Connect Hose
Attach hose to the electric air
motor.
Turn hose connector 90 degrees
clockwise until the red dot is no
longer visible.
RED DOT disappears when
in locked & sealed position
3. Power Mattress Genie On
Plug the black power cord into a
dedicated wall outlet.
Turn the black power button on
the motor to the "on" position.
Press | for power on
Press 0 for power o
for tips to set up and to achieve the most out
Visit contourliving.com
& click "chat now"
USING YOUR MATTRESS GENIE HAND
When the Mattress Genie is turned
on, you can use the hand held
remote to easily adjust the angle
of elevation.
UP - Hold button down to inflate the
air bladder.
DOWN - Hold button down to
deflate the air bladder.
FLAT - Press button once to
completely to deflate your air bladder.
Do not press any other button or it will
cancel the deflation.
The flat button starts a 2 minute timer to
open the valve in the motor to allow air
to escape and deflate the unit.
Note: You will not hear any motor noise
when deflating.
Scan QR or visit
www.contourliving.com/
mattress-genie-adjustable-wedge/
of elevated sleep & relaxation.
HELD REMOTE
C0132_2022-03-29