ES-09 Field Installation Manual INDEX Important Instructions……………………………………………………………………………. 2 Product Specifications……………………………………………………………....3 Unpacking & Mounting ………………………………………………………….……………. Connection Type 1 …………………………………………………………………....Connection Diagram ………………………………………………..………………………… Connection Type 2 ……………………………... ……………………………………………. Connection Type 3 ……………………………………………………………………………… Electrical Data Sheet ………………………………………..…………………………………. Recommended Part List…………………………………………………..……………………. 10 ______________________________________________________________________________________...
Any warning provided by Celec must be passed through to the end user. Celec offers a warranty only as to the quality of its product to confirm to the catalog specifications. No other warranty is offered. Celec assumes no liability for any personal injury, property damage, losses or claims arising out of the misapplication and Non performance of its products.
PRODUCT SPECIFICATIONS Model ……………………………………………………………………………… ES-09 Rated Voltage……………………………………………………………………… 240V AC Phases………………………………………………………………………………… Single Phase 240V AC Rated Frequency………………………………………………………………… 50Hz Maximum Current…………..……………………………………………….… 39 Amp Rated kVar...………………………………………………………………… 9.27 kVAr Maximum Ambient Temperature Rating………………………..… Enclosure……………………………………………………………………………… Type 1 Connection Connection Wire Type & Torque N-m Size...
CAUTION Indoor Use Only, Type-1 Enclosure. 1. Choose the dry and Clean Wall to Install the ES-09 taking care conduit connections from Bottom side Enclosure Size is 400 x 500 x 120 mm and weight 13kg ( 29 Pounds). 2. Premark the Mounting holes on wall or structure.
1.11 Remove the Panel cover of ES-09 exposing internal connections. 1.12 Locate Earth Terminal in ES-09, connect the earth wire to ES-09 Earth Terminal. Connect the other side of earth wire to main breaker panel ground rod. Ensure all mechanical connections are secure and making full contact.
Use these instructions If 63 Amp circuit breaker is unavailable, existing blanks are available. ES-09 unit is designed for use with Customer Main Breaker Panel Single Phase 240V AC up to 400 Amp. ES-09 units should be mounted with four appropriate sized fasteners before connect to Main Breaker Panel.
2. Wire in rigid conduit between customer main breaker panel & external disconnect switch. Connect to ES-09 using 1/2‘’conduit. 3. Locate earth ground connection in ES-09 and connect to grounding bar or to earth ground rod in main breaker panel.
ES-09 Field Installation Manual Electrical Data Sheet Model ES-09 Phase Configuration Single Phase 240V AC Maximum Line Voltage 240V AC Maximum Power 9.27 kVar Monitoring PF-Volt, Current, KW,KVA,KVAR- ON Status Of Capacitors Accuracy 0.18 kVar Frequency 50Hz Protection Capacitor Inbuilt Protection P2...
Installation of material and workmanship at the customer’s Main Breaker Panel shall be the responsibility of the qualified Electrician in accordance with NEC. Any and all connections exterior to the ES-09 unit shall be the responsibility of the qualified Electrician. ______________________________________________________________________________________...