Using the LCD Menu and Buttons........................6 Menu Operation..............................7 DMX Setup................................8 DMX Basics................................8 DMX Wiring................................8 DMX Modes and Configuration........................10 Standalone Mode and Configuration......................11 3. Maintenance................................12 Routine Maintenance............................12 Troubleshooting Problems..........................12 4. Technical Specifications............................13 Photometric Reports............................14 Luxé Bloom Cyclo – GAMMA LED Vision Page 2 of 14...
It’s output is smooth and allows for washes of large sur- faces when multiple units are used. It features a 90° x 120° beam angle for wide, even cover- age! Luxé Bloom Cyclo – GAMMA LED Vision Page 3 of 14...
∙Warranty is voided if there are any malfunctions from not following the user manual while op- erating or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc. Luxé Bloom Cyclo – GAMMA LED Vision Page 4 of 14...
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of purchase to be free of manufacturer and workmanship defects. Warranty does not cover normal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vision is not re- sponsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual.
There are also various status LED’s on the Luxé Bloom Cyclo to show if DMX is active, if the unit is in Master, Slave, or Sound-Active mode. Luxé Bloom Cyclo – GAMMA LED Vision Page 6 of 14...
Sets whether the backlight turns off when in- active. Auto Test Sets unit into Auto Test Mode Fixture Temp Displays Fixture Temp in Celsius Fixture Time Displays Fixture Hours Version Displays Firmware Version Luxé Bloom Cyclo – GAMMA LED Vision Page 7 of 14...
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resistance. Microphone cable is not DMX cable. Luxé Bloom Cyclo – GAMMA LED Vision Page 8 of 14...
Page 9
XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: Luxé Bloom Cyclo – GAMMA LED Vision Page 9 of 14...
DMX universe. View the DMX mode charts on the next page to find the mode that best suits your needs. Luxé Bloom Cyclo – GAMMA LED Vision Page 10 of 14...
By linking the units with DMX cable in a Master/Slave connection, the first unit will control the other units to give an automatic, sound-activated, synchronized light show when the Luxé Bloom Cyclo is placed into Standalone mode by the on-board menu and keys. Luxé Bloom Cyclo – GAMMA LED Vision Page 11 of 14...
Plug the light directly into the DMX controller with a cable that you know is good. • Unplug all other lights – does it work? Try to use another DMX controller. • Luxé Bloom Cyclo – GAMMA LED Vision Page 12 of 14...
You may find that your application requires less fixtures or more, but use this as a guide- line in your calculations. Distance from Lit Surface Spacing Between Fixtures Approx. Vertical Coverage (Horizontal) 1’ 3’ 12’+ 2’ 4’ 16’+ 3’ 5’ 20’+ 4’ 7’ 24’+ Luxé Bloom Cyclo – GAMMA LED Vision Page 14 of 14...