keilhauer Forsi Table Assembly Instructions

Forsi Table
Assembly Instructions
1
Place the table top upside down on a blanket.
3
Install the table leg (x2) onto the table top and the steel
frame at the four mount locations. Using the 5/32" hex
key fasten with 1/4"-20 x 2" flat head cap screw (x8).
5
Place assembled table in its final position.
Tool Required
5/32"" Hex Allen Key Phillips head screw
driver
Hardware Included
1/4-20 x 2" #6-32 x 3/4"
Rounded head screw
Flat head cap screw
(x8)
(x8)
2
Using the 5/32" hex key, fasten the steel frame with
1/4"-20 x 5/8" button head cap screw (x6).
4
Using the Phillips head screw driver, install the glide (x4)
using #6-32 x 3/4" rounded head screw (x8).
1
1/4-20 x 5/8" Glide
Button head cap screw
(x4)
(x6)
Installed
keilhauer.com