Aquatic NHL-SPO-01 Quick Start Manual

Product: Smart Plug
Model: NHL-SPO-01
NHL Home Automation Starter Kit.Follow the simple step by step instructions below and within
minutes,you will be able to control the lights in your home through your smartphone and be on
your way to enjoy mood-enhancing scenes.
In order to ensure proper setup,please refer to following step-by-step guide & keep these
instructions in a safe place for future reference.
What's included:
*1 hub
*2 RGB color-changing LED light bulb
*1 plug-in power outlet
*1 21-button keypad
1.Connecting your Phone & the NHL Hub to your home network
Step 1
Connect the included power supply to the NHL Hub.(Note:The green LED light will begin
flashing.If it does not,press & hold the SL button until you see the green LED light flashing.)
Step 2
Connect your Smarphone to your home's wifi network
Step 3
On your smartphone ,open the 'iHome Kits' app and press the 'SmartLink' button
Step4
In the 'Router Pass' field,input your wifi password.In the 'Host Pass',you can change the unique
password for the hub to login for cloud control.Once you have connected your NHL hub to your
home wifi router using the SmartLink option,you will see the yellow,green & blue light stay on the
hub.You will also see the unique mac address & password from the 'login' option that you can use
to control the connected devices from anywhere you are .(Note:To change the hub login
password ,please press the reset button first,and then follow the steps listed above.)
Adding Rooms to Control
2.Adding Rooms to Control
Step 1
Press the 'Add' button to add a room.On the next page,you will be able to add the name of the
room.You can add a picture to the room using one of the available images or you can take a photo
of your own by pressing the 'camera' button.
Step 2
Enter the room that you would like to control and press on the 'Add' button.The app
Will then ask you to power the device off and back on again(any device connected to the LED
bulb or the NHL Power Outlet).Once you have done that,the app will find the device
automatically.You may then proceed to change the ID name and or photo.
Note:Please add only one device at a time.