Arlec PC697 Series Operating Instructions Manual

Compact Digital
Time Switch
Operating Instructions
Introduction
The PC697 Time Switch has a built in, rechargeable battery. If a
power failure occurs or the unit is removed from the mains outlet,
the rechargeable battery will power the time switch avoiding the
loss of any preset programs. NOTE: The rechargeable battery is
a non replaceable type. the battery will not provide power to any
appliance during a power failure.

Initial Set-up

1) Plug the timer into a mains outlet and switch on.
2) All segments of the display should flash on momentarily
if the screen was blank prior to power up.
NOTE: If screen remains blank after connection to mains supply,
leave unit for approx 14 hours to fully charge the battery before
operation.
3) If unit was already operational before connection to mains
outlet,reset unit by pressing small reset button using a
paperclip or pen. The display segments should all illuminate
and the unit will reset to time 0:00
7 Instructions V6_2.indd 1
READ INSTRUCTIONS CAREFULLY BEFORE INITIAL USE.
Keep in a convenient place for future reference.
CPIN002310
1
PC697 series 7
23/01/12 9:58