Healthmark 9060 Instructions For Use

Brand Name of Product
Generic Name of Product
Product Code Number(s)
Intended Use
Range of Applications for Product
Key Specifications of Product
Shipping & Storage
Shipping Conditions &
Requirements
Storage Conditions
Packaging Contents
Shelf Life
Instructions for Using Product
Description of Use(s)
Preparation for Use
Diagrams (drawings, pictures)
Document Version 1
Instructions for Use: Spray Gun #9060
Spray Gun
Spray Gun
9060
For use in the cleaning of items with water or air.
N/A
●
Use with the "universal" slip-tip, or the optional quick connect set of tips for
specialized functions.
●
Maximum water or air pressure 12 bar (172 psi).
N/A
N/A
N/A
N/A
A tool to use in the cleaning of items with water or air.
●
Best installed by a licensed plumber. Please contact Facilities and/or
Engineering for installation of the spray gun. Installation of the spray gun is
done by the facility.
●
Connection requirements
Water connection:
o
▪
▪
Air connection:
o
▪
▪
●
Prior to operation, ensure attachments are correctly seated on the safety cone.
●
If the spray gun is not in use, it must be assured the water or air pressure have
been turned off.
●
When the hose of the Spray Gun is installed to the water line, a separate shutoff
valve needs to be installed to the spigot. (Note: The spray gun is not a
controller.)
Plumbing threaded tap or valve: 3/8-, 1/2- or 3/4-inch
Standard gun kit includes 3/4-inch female connection.
If operated with compressed air, the tubing must be connected
to the air supply by a suitable connector (Note: Cannot be
supplied by Healthmark).
When connecting the gun to water or air below the counter, it
is recommended that a rosette be installed.
●
The rosette will minimize potential friction damage to
the hose.
●
Drill a 1 3 / inches diameter hole in the counter or
8
sink top to accommodate the rosette.