Subscribe to Our Youtube Channel
Summary of Contents for Med-E-Lert 1.0PREMIUM
- Page 1 ENGLISH Med-E-Lert™ Locking Automatic Pill Dispenser Easy Set-up Guide MODELS 1.0PREMIUM / 1.0PREMIUM-C / 1.0PREMIUM-W 06146-1...
-
Page 2: Turning The Unit On
Unlocking/Locking the Device INTENDED USE The Med-E-Lert™ has a safety feature to reduce the chances of The Med-E-Lert™ Automatic Pill Dispenser is theft and/or tampering. It comes designed to assist you with the organization of with a custom barrel key that allows... -
Page 3: Display Layout
2. Press inward on the tab on the front of the 12/24-Hour Formats machine (it is part of the lid). The Med-E-Lert™ defaults to a 3. Making a pinching motion with your thumb 24-hour format, also commonly and index finger, grasp the lid through the referred to as military time. -
Page 4: Setting The Time
» Scroll up minutes quickly: press and hold time format, it is time to set the down button 3. clock on your Med-E-Lert™. 1. Press and hold down button 1 until the hour 3. Press and hold button 1 for several seconds digits blink. -
Page 5: Setting The Alarm Tone
| USER MANUAL- ENGLISH | USER MANUAL- ENGLISH remaining alarm to skip them (2-6). » Scroll up hours quickly: press and hold down » After you press button 1 after the sixth alarm, button 3. you will return to the main screen. »... - Page 6 | USER MANUAL- ENGLISH | USER MANUAL- ENGLISH On the display, you will see the Note: some dosage rings letter “a” in a circle. This is the first have a red portion; do alarm tone. There are three alarms not place medication into the corresponding tones, which are displayed on the compartments, as those...
-
Page 7: Turning Off The Alarm
» (Tip: to further secure the dosage ring onto the Med-E-Lert™, you may use double- sided adhesive tape “underneath the selected dosage ring’s tabs.) 06146-7... -
Page 8: General Information
Programmmable Alarms » If there is no operation performed for one minute, the Med-E-Lert™ will go into Contents Up tp 18 baby aspirin-sized pills standby/sleep mode to save battery life. Capacity... - Page 9 | USER MANUAL- ENGLISH | USER MANUAL- ENGLISH QUICK Q & A Q: What do I A: Check your alarms’ do if my pill tray settings. If there are two or rotates and skips more alarms scheduled for the Q: What do I do A: This can be caused by three compartments? same time, the compartment...
- Page 10 | USER MANUAL- ENGLISH | USER MANUAL- ENGLISH Q: What do I do A: Remove all four batteries if the alarm will and leave them outside of the not turn off? device for one to two hours; afterwards, make sure to replace them with four brand new batteries.
- Page 11 | USER MANUAL- ENGLISH | USER MANUAL- ENGLISH 06146-11...
- Page 12 help@mededispenser.com +1 (801) 285-8011 9265 South Highland Dr., #900250, Sandy, UT 84093, United States www.medelert.com ENGLISH 06146-12...
- Page 13 |MANUAL DE USUARIO- ESPAÑOL ESPAÑOL Med-E-Lert™ Guía de Configuración Sencilla MODELOS 1.0PREMIUM / 1.0PREMIUM-C / 1.0PREMIUM-W 06146-13...
-
Page 14: Qué Hay En La Caja
Usuario Desbloqueo / Bloqueo del Aparato USO PREVISTO El Med-E-Lert™ tiene una función El Dispensador de píldoras automático Med-E-Lert de seguridad para reducir las ™ está diseñado para ayudarlo con la organización posibilidades de robo y / o de sus medicamentos, además de recordarle manipulación. - Page 15 1. Asegúrese de que su dispositivo esté desbloqueado. Formatos de 12 / 24 Horas 2. Presione hacia adentro en la pestaña en el El Med-E-Lert™ tiene guración frente de la máquina (es parte de la tapa). predeterminada un formato de 24 3.
- Page 16 » Desplazarse hacia arriba en minutos formato de hora, es tiempo de rápidamente: mantenga presionado el botón 3. reloj de su Med-E-Lert™. 1. Mantenga presionado el botón 1 hasta que 3. Mantenga presionado el botón 1 durante varios los dígitos de la hora parpadeen.
- Page 17 |MANUAL DE USUARIO- ESPAÑOL |MANUAL DE |MANUAL DE USUARIO- ESPAÑOL USUARIO- ESPAÑOL restantes, hasta seis veces. rápidamente el botón 3. » Si no necesita ninguna alarma adicional, » Desplazarse rápidamente hacia arriba en las presione y suelte rápidamente el botón 1 a horas: mantenga pulsado el botón 3.
- Page 18 |MANUAL DE USUARIO- ESPAÑOL |MANUAL DE |MANUAL DE USUARIO- ESPAÑOL USUARIO- ESPAÑOL esto le ayudará cuando llega el momento de mientras mantiene presionado el botón 3, colocarlos en la bandeja de pastillas.) presione el botón 1. En la pantalla, verá la letra “a” en un (Consejo: agrupe sus medicamentos / suplementos círculo.
- Page 19 9 días. anillo ación » Reabastecimiento de cuatro dosis de en el Med-E-Lert medicamentos al día cada 7 días. ™, puede usar cinta » Resurtidos de cinco dosis de medicamentos adhesiva de doble al día cada 5 días.
-
Page 20: Apagar La Alarma
Levante la unidad e inclínela para » Si no se realiza ninguna operación durante dispensar el contenido por la un minuto, el Med-E-Lert ™ entrará en ventana de la tapa en su mano o modo de espera / suspensión para ahorrar en un recipiente adecuado. -
Page 21: Información General
|MANUAL DE USUARIO- ESPAÑOL USUARIO- ESPAÑOL PREGUNTAS FRECUENTES INFORMACIÓN GENERAL P: ¿Qué hago si R: Esto puede deberse a Modelo 1.0PREMIUM-CM 1.0PREMIUM-W 1.0PREMIUM veo “ERR” en mi tres casos: 1) La bandeja de pantalla? pastillas se ha atascado. Abra 860001703436... - Page 22 |MANUAL DE USUARIO- ESPAÑOL |MANUAL DE USUARIO- ESPAÑOL P: ¿Qué hago P: ¿Qué hago si R: Retire las cuatro baterías R: Veri la co ación de si mi bandeja sus alarmas. Si hay dos o más la alarma no se y déjelas fuera del dispositivo de pastillas gira alarmas programadas para la...
- Page 23 |MANUAL DE USUARIO- ESPAÑOL |MANUAL DE USUARIO- ESPAÑOL 06146-23...
- Page 24 |MANUAL DE USUARIO- ESPAÑOL |MANUAL DE USUARIO- ESPAÑOL 06146-24...
- Page 25 help@mededispenser.com +1 (801) 285-8011 9265 South Highland Dr., #900250, Sandy, UT 84093, Estados Unidos www.medelert.com ESPAÑOL 06146-24...
Need help?
Do you have a question about the 1.0PREMIUM and is the answer not in the manual?
Questions and answers
I **** unable to set the current time correctly. When I do enter the time it is entered as A1 time and not the current time. Then it moves on to A2 and A3 which it allows me to enter those alarm times.. I have replaced all the batteries and it still does the same thing.
To set the current time correctly on the Med-E-Lert 1.0PREMIUM, follow these steps:
1. Press and hold button 1 until the hour digits start blinking.
2. Adjust the hour:
- Press and quickly release button 2 to decrease the hour.
- Press and quickly release button 3 to increase the hour.
- Hold button 2 or 3 to scroll quickly.
3. Press button 1 again to move to the minutes.
4. Adjust the minutes using button 2 (down) or button 3 (up).
5. Press and hold button 1 for several seconds to finalize the time and return to the main screen.
If the device keeps reverting to "A1" time, ensure that the correct time format (12-hour or 24-hour) is selected by pressing and holding buttons 2 and 3 simultaneously.
This answer is automatically generated
How do I set the current time?
How do I clear all alarms ?
To clear all alarms on the Med-E-Lert 1.0PREMIUM, go to each alarm you want to delete and scroll the time backward until you see four dashes (--:--). This indicates the alarm has been cleared. Repeat for each alarm.
This answer is automatically generated
I never see the 4 blinking dashes. I'm trying to take off 4 alarms, but can't, because the dashes are not there, so time can't go to the dashes. What do I do?
To remove alarms on the Med-E-Lert 1.0PREMIUM, go to the alarm you want to delete and reduce the time until you see four blinking dashes (--:--). This indicates the alarm has been removed.
This answer is automatically generated
We own a Med-E-Lert Automatic Pill Dispenser and have been very happy with it. We got home after the alarm had gone off. We turned it over to retrieve the pills. The red light continues to blink, and it does not progress to the next dose. We tried removing the batteries to do a reset. What do we do?
If the red light on the Med-E-Lert 1.0PREMIUM Automatic Pill Dispenser continues to blink and does not progress to the next dose, check the battery level. If the batteries are lower than 4.0V, the red light and low battery icon will blink, indicating that the batteries need to be replaced. Replace all four AA batteries with new ones and ensure they are oriented correctly. If the issue persists, check for any obstructions in the pill tray and remove them if found.
This answer is automatically generated
How to turn off unneeded alarm Thank you