Table of Contents
Advertisement
installation
- Check that the screws to be used for mounting the hood are suitable for the type of wall on
which it is to be mounted.
- Position the wooden bracket on the wall according to the measurements in the figure below
and fasten it with the appropriate screws.
1 - 3/8"
16 - 5/8"
!
IMPORTANT NOTE: Ensure that the wall is suitable to support the weight of the hood. If
necessary, create a reinforcement structure before installation.
NOTE: This structure must be strong enough to support the weight of 350 lb (158.7 kg).
2 - 3/8"
- 15 -
Advertisement
Table of Contents
