MTI RAPIDDOC Installation Manual page 5

ACCESS CARD REGISTRATION
1
Make sure the RapidDoc
ready.
3
Place a RFID Access card on the RFID Module until
LED flashing stops and returns to solid green.
www.MTIGS.com | T:801.653.3807
-CONTROLLED DOCUMENT-
®
RFID Module is powered and
063-00216 C-0
®
LITE KIOSK INSTALLATION GUIDE
RAPIDDOC
2
Place the RFID Authorization Card on the RFID Module
until the LED flashes.
4
If no Access Card is detected, the Base will return to
normal condition waiting for registered Access Card to
unlock the Base. The Base can register a maximum of
20 Access cards. The process will need to be repeated
for each card. If a 21st card is registered, the first regis-
tered card will be deregistered.
MTI P/N 063-00216 rev C ©2021 MTI All Rights Reserved
Status: Approved
IF AUTHORIZATION
CARD IS LOST OR
STOLEN, CONTACT
CUSTOMER SERVICE FOR
REPLACEMENT.
ECO-112352
5