Page 1
Project Name: Item #: Model #: WSMS HAND SINK INSTALLATION GUIDE For Design and Installation Assistance Call: 800-221-5644 info@imcteddy.com 50 Ranick Drive East Amityville, NY 11701 (P) 800-221-5644 (F) 631-789-8881 www.imcteddy.com...
Page 2
(Make Z-Clip sure bracket is level.) Once holes are drilled screw bracket to wall. (Hardware not included.) Drill Faucet Step 2: Install included parts, in this case the faucet. (Model shown is WSMS Hand Sink)
Page 3
Step 3: Wall Place sink on z-bracket. Place brackets underneath edge of sink and against the wall to drill WSMS screws in. Hand Sink Drill Wall Step 4: Make all necessary plumbing connections to faucet and waste drain. Note: All plumbing connections of our equipment are subject to plumbers/ installers discretion.
Page 4
This can lead to surface rust. For more in-depth maintenance & care guidelines, Following these recommendations for the care and visit these resources: cleaning of your stainless steel product will insure IMC/Teddy Tips NAFEM Tips that it will provide you with many years of service.