Loading Ramp Instructions
Ramps are intended for specific applications and it's imperative that the purchased ramp is not used
for any other applications than it's intention. Please read carefully and comply with the instructions on
how to use quality loading ramps.
Instructions are as follows:
1. The bolt must be inserted and hand-tighten though the barrel hinge.
2. Ramp surface must be dry, clean and free from oil or grease.
3. Park vehicle or trailer on flat, firm ground. Be sure that the vehicle is parked with emer-
gency/parking brake on and the engine turned off.
4. Place ramps on the tailgate or trailer to accommodate the wheelbase of the loading vehicle.
5. Insure that the plate or fingers of the ramp are securely in place.
6. Install and secure safety straps. An illustration of how to secure the safety straps is as follows:
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Dezember 2019
Version
2
Seite 3