Advertisement
Before use...
Install 4 x AA batteries as follows...
battery
case
Zip
1. Take the battery case out of the massager
power cable
battery case
batteries
3. Insert 4 x AA batteries observing the correct
polarity
5. Check the case is closed correctly and place
back into the massager
How to use...
Run yourself a nice hot bath, turn your massager on and use it
anywhere on your body that feels good! Simple!
1703IM - 1703040418.indd 6-7
battery case cover
battery case
2. Open the battery case as shown above
battery case cover
battery case
4. Close the battery case as shown above
ON/OFF
ON/OFF
outer button
inner button
Outer
cover
Main body
6. Ensure the inner and outer power button are
aligned and zip up the cover.
Precautions
Please read this Instruction Manual carefully to ensure you are using the
massager correctly. Please also note:
• Do not use whilst driving or walking
• Store the massager away from humidity, heat and/or corrosive gas.
• Individuals with symptoms such as inflammation, blood stasis or those who
have undergone a recent operation should not use this product.
• Do not use foot ornaments or jewellery when using this product
• Do not apply nail polish within an hour before using this product.
• If the massager will not be used for a long time, remove the batteries to avoid
leakage.
• This massager is designed as a personal care product. It is not for diagnosis /
treatment of any health disorder or injury, Nor it is meant for commercial use.
• Do not machine wash the outside cover. Only wash by hand.
• Use only the correct size batteries ensuring the correct polarity is observed.
Troubleshooting
Problem
Possible Reason
Batteries are low / run out
Massager will not power on
Batteries are not installed
Weak vibration
Batteries are low / run out
Technical
Product Name: Bath Massage Pillow
Product SKU: 1703
Power Supply: 4 x AA batteries
Ideal Environment: Temperature: 5°C - 40°C Relative humidity: ≤80%
Material: Main body: Sponge Foam, PVC waterproof cover Outside cover: Refer to the
washing label.
Product size: 300mm X 260mm X 80mm
Waterproof Grade: IPX7
Possible Solution
Change batteries
Check if batteries have
been inserted correctly and
correctly
are seated suitably.
Change the batteries.
Check if batteries have
been inserted correctly and
are seated suitably.
05/04/2018 10:15:02
Advertisement
