Allstar Innovations Easy Touch Speaker User Manual

COMPONENTS
V-Cable
Easy Touch Speaker™
PLEASE READ ALL INSTRUCTIONS AND WARNINGS ON THIS
SHEET PRIOR TO USING THE EASY TOUCH SPEAKER™.
Keep this instruction sheet for future reference.
SAFETY WARNINGS
PLEASE READ BEFORE US
• Not a children's item. Keep out of reach of children.
• Use this item only for its intended purpose.
• Place this item on a hard, flat surface away from liquids.
• Do not expose to rain or water sources. Unit is not water resistant.
• Do not expose to extreme temperatures or moisture.
• Thoroughly inspect products before every use. If the product appears worn,
frayed/splintered, cracked, or broken in any manner, discontinue use and
discard immediately.
GETTING STARTED
1. Press the Power Button to turn on
Wireless Charger
Micro USB Port #1
the unit.
Power
Button
Power/Internal
Battery Charging
AUX
Micro USB Port #2
Input
2. Place your phone on top onto the 3. Play a song on your device and
speaker. Ensure your phone's adjust your phones alignment left to
speaker are facing the symbol on the right to find the ideal location on the
lower left corner of the device. device for your phone. Adjusting the
position of your phone will adjust the
sound clarity and volume.
4. Phone Calls: When using your Easy
5. Adjust the volume by changing the
Touch Speaker™ for phone or video
volume level on your phone directly
calls you must turn on the speaker
and the speaker sound will also be
phone function on your phone. As the
reduced.
device amplifies sound only played
through your external phone speaker.
Suggest setting your phone speaker
to around 50% the first time you use
it. Also follow steps #3 to find the
ideal location for your phone place-
ment before increase the volume on
your phone.
POWERING & CHARGING
1. CHARGING SPEAKER: Use DC 2. Wireless Charger- Use DC port #1
port #2 to charge the internal battery to power the wireless charging
in the device. Use a micro-usb cable function. Use a the included micro
(included) and a 5V power source usb cable and a 5V power source
(not included) When speaker is (not included). Place your Wireless
charging, the light is red when Charging compatible phone on the
completely charged the light will device. slide your phone left to right
illuminate blue. slowly if charging does not begin.
*Charge before first use when using
device wirlessly
3. You can also use a 3.5mm aux cable (not included) to amplify your phone, or
other electronic devices.
4. Fold out the metal stand to adjust
5. To use tablets in portrait mode
viewing height of your device. The
or to help secure devices rotate the
stand is ideal for use with tablets.
two stops upward.
TIPS
• Power Status: Turn on the on/off switch. The blue light on means the speaker is
on. When the blue light dims, the power low, when blue light turns off the speaker
needs charging. When the speaker is charging, the power button turns red. Once
charging is complete, the red light turns off.
• Battery: The battery charging time 2-3 hours by 5V/2A input power (adapter not
including), playing time about 6 hours (time may vary)
• Volume Control: To adjust volume, change the level on your mobile device and the
speaker will automatically adjust the output volume.