Table of Contents
Advertisement
Quick Links
Operation and Maintenance Manual
Please read this manual carefully before using the machine –
Non-observance of warnings and instructions may result in electric shock, fire and/or severe injuries!
This manual only applies to BOS® Cleaner duct cleaning brushing machines. They may only be used
in dry conditions without any danger of explosion.
The machines are not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience or knowledge as to how to use the machine.
Children must be kept at a distance from the machine.
Disclaimer: This manual has been reviewed, but 100 % accuracy is not guaranteed. As part of our
policy of continuous product development, we reserve the right to revise features and specifications
of the product. Therefore, any claims based on the data, pictures, drawings or text in this manual
cannot be accepted. We cannot guarantee that there are no errors.
BOS® Cleantec
BOS® CLEANING MACHINES
it is essential for ensuring correct and safe operation!
READ ALL SAFETY AND OPERATING INSTRUCTIONS!
KEEP THE MANUAL FOR FUTURE REFERENCE!
Bierkühl Oy
Pellonlaita 1, 50600 Mikkeli Finland
+358 440 178 111
www.boscleantec.com
Advertisement
Table of Contents
Summary of Contents for bierkuhl BOS Cleantec Cleaner 370e
- Page 1 BOS® Cleantec BOS® CLEANING MACHINES Operation and Maintenance Manual Please read this manual carefully before using the machine – it is essential for ensuring correct and safe operation! READ ALL SAFETY AND OPERATING INSTRUCTIONS! KEEP THE MANUAL FOR FUTURE REFERENCE! Non-observance of warnings and instructions may result in electric shock, fire and/or severe injuries! This manual only applies to BOS®...
-
Page 2: General Notes
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes GENERAL NOTES The products covered by this manual have been manufactured in Finland to existing laws, decrees and regulations as stated in the Declaration of Conformity below. The person in charge of machine operation must be acquainted with the construction and operation of the machine and must ensure safe operation. -
Page 3: Technical Data
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes TECHNICAL DATA BOS® Cleaner 370e BOS® Cleaner 750e Operating voltage 240 V 240 V Frequency 50 Hz 50 Hz Motor 0.55 kW 0.75 kW Speed control With the drive converter With the drive converter Power cord (rubber cable), 3G 3*1.5 mm²... -
Page 4: Intended Use
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes INTENDED USE The BOS® Cleaner duct cleaning brushes have been designed for professional use. When working with the machines, the following safety aspects should be considered: Protect the machine against moisture and vibration! ... - Page 5 Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes CONSTRUCTION AND CONTROLS BOS® Cleaner 370e BOS® Cleaner 750e SIVU 5 Bierkühl Oy +358 440 178 111 Pellonlaita 1, 50600 Mikkeli Finland www.boscleantec.com...
-
Page 6: Accessories And Spare Parts
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes ACCESSORIES AND SPARE PARTS When ordering spare parts, please always state the model, type and serial number of the machine. This information can be found on the CE plate, which is located on the inside of the switch panel. Basic brush M12 100–400 mm, soft, PP bristle Soft brush, 200–1000 mm,... -
Page 7: Operating And Safety Instructions
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes OPERATING AND SAFETY INSTRUCTIONS PLEASE CAREFULLY OBSERVE THE FOLLOWING BEFORE AND DURING OPERATION: The machine operator must ensure that the machine is fit for the intended purpose. The machine operator must ensure that the voltage and current supplied match the ratings on the CE plate. -
Page 8: Operation
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes OPERATION 1. Transport The machine must be protected against dirt and moisture during transport. The machine must not be stored outdoors unprotected. Exercise extreme care and caution when moving or lifting the machine. The machine must be transported in a vertical position and securely tied down. -
Page 9: Maintenance
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes MAINTENANCE Remove all dirt and dust from the machine after every use! Do not use running water for cleaning! Before starting any maintenance or cleaning work on the machine, make sure to disconnect it from the power source! ... - Page 10 Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes ENVIRONMENT/RECYCLING Waste materials must be disposed of in compliance with the relevant legislative requirements and without harming the environment. A discarded machine or any part of it must not be disposed of together with household waste! ...
-
Page 11: Warranty
Operation and Maintenance Manual BOS® Cleantec Duct Cleaning Brushes WARRANTY Provided that the operating and maintenance instructions are strictly adhered to, the product is covered by a 12-month factory warranty starting from the date of purchase. Any defects discovered during this warranty period are rectified free of charge, provided that ... -
Page 12: Declaration Of Conformity
BOS® Cleantec Duct Cleaning Brushes DECLARATION OF CONFORMITY Manufacturer: Bierkühl Oy, Pellonlaita 1, 50600 MIKKELI, FINLAND Tel.: +358 440 178 111 Website: www.bierkuhl.com Product designation: Powered duct cleaning brush Product name: BOS® Cleaner Intended use: Cleaning of air ducts Serial number:...
Need help?
Do you have a question about the BOS Cleantec Cleaner 370e and is the answer not in the manual?
Questions and answers