Campbell Hausfeld PT281303 Manual

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Replacment Parts List
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or
property damage! Retain instructions for future reference.
Description
This paint tank is designed for large volume projects using spray guns, paint rollers
and other application equipment. The tank is capable of holding 2.5 gallons of bulk
paint or a 1 gallon can of paint may be placed directly inside the tank.
Basic construction of the unit consists of a heavy deep drawn one piece stainless
steel tank, die cast aluminum tank lid, eyebolt clamps, and a plastic protective
sleeve. The unit is equipped with a pressure regulator, gauge, safety relief valve,
and air line connectors. A convenient carrying handle allows attachment of the unit
to the rung of a ladder or scaffolding to facilitate elevated painting operations.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Tighten
fittings, bolts, etc., before putting unit
into service.
unit if damaged during shipping,
handling or use. Damage may result in
bursting and cause injury or property
damage.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following
symbols.
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
Specifications
Capacity
1 Gallon can or
2.5 Gal. bulk
© 2008 Campbell Hausfeld/ Scott Fetzer
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
a potentially hazardous situation
Do not
which, if not avoided, MAY result in
operate
minor or moderate injury.
important information, that if not
followed, may cause damage to
equipment.
CALIFORNIA PROPOSITION 65
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
Danger
cause cancer, birth defects, or other
indicates
reproductive harm. Wear protective
gear.
Tank
Dimensions
8.25 Dia. x 11.5 inch
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Paint Tank
Warning
indicates
Caution
indicates
Notice
indicates
Overall
Dimensions
10 inch x 10 inch x
14 inch
or its power cord contains chemicals
known to the State of California to
cause cancer and birth defects or other
reproductive harm. Wash hands after
handling.
General Safety Information
Since the paint tank and other
components used, (air compressor,
material pump, spray guns, filters,
lubricators, hoses, etc.) make up a high
pressure pumping system, the
following safety precautions must be
observed at all times:
1. Read all manuals included
with this product
carefully. Be thoroughly
familiar with the controls
and the proper use of the
equipment.
2. Follow all local electrical and safety
codes, as well as in the United
States, the National Electrical Code
(NEC) and the Occupational Safety
and Health Act (OSHA).
Weight Maximum Working
(Empty) Pressure
10 lbs. 50 psi
IN233703AV 1/08
PT281303
This
product
MANUAL