Unilevel UNG6701 Instruction Manual

Green 3 Dot Point Laser Instruction Manual
The UNG6701 is an auto levelling 3 dot green laser with a class 3r <5mW output. The laser pro-
duces an ultra bright plumb dot up and down, plus a horizontal level dot. The UNG6701 is ideal
for all manner of internal fit out applications as well as visible outdoor work. The laser comes with
a magnetic mounting base which also allows the laser to mount on to either a survey or camera
style tripod if required. The laser is powered by 4x "AA" batteries.
Laser Output Horizontal Level
Operation
First insert batteries in to the battery holder located in the battery compartment. The battery holder takes 4 "AA"
batteries (preferably Alkaline) take care to insert in the correct direction as indicated. Insert the holder back into the
battery compartment making sure the three round terminals are inserted first to contact the three internal spings in
the battery compartment. Note you will need to remove the laser from the bracket to do this.
The UNG6701 can be operated with or without the mounting bracket. To power up the laser simply flick the locking
switch to the on position. All three laser dots will illuminate at the same time.
www.redbacklasers.com.au
Laser Output Plumb Up
Locking Switch
Laser Output Plumb Down
UNG6701
Green 3 Dot Laser
Soft Carry Bag
Magnetic Mount with
5/8" and 1/4" Tripod Mounts