Troubleshooting Your Humidifier (Table 2) - Honeywell HE360 Installation Kit

TROUBLESHOOTING YOUR HUMIDIFIER (TABLE 2)

Problem
Water leakage
No water to drain.
Table 2. Troubleshooting Humidifier.
What to look for
Leaking joints.
Brass tubing inserts
Saddle valve leaking.
Electrical
Humidistat
Humidifier power
Solenoid
Plumbing
Saddle valve
Humidifier
Drain tubing
HE360 HUMIDIFIER INSTALLATION KIT
Shut off water.
Tighten connections.
Verify that brass tubing inserts are
used.
Verify rubber pad is installed on
saddle valve.
Verify control circuit wiring.
Check all connections.
Turn humidistat up and down and
listen for contact to click.
Verify that outlet has power.
After verifying other wiring
components, turn on furnace fan,
turn humidistat up and down, and
listen for solenoid to click.
Verify plumbing connections.
Check for kinks.
Verify that needle pierces water
line and then backs out needle to
open valve.
Remove cover and verify that water
flows into distribution tray.
Verify no obstructions.
7
What to do
69-2519—01