Advertisement
All-in-One USB-C Docking Speakerphone
HALO 90
Setting up the Speakerphone
CONNECTING THE SPEAKERPHONE
1. Connect the supplied USB Type-C cable into the port on the side of the
speakerphone.
3. Connect an HDMI cable from your display into the port on the side of the
speakerphone.
Additional Connections
Power Adapter to provide direct USB-C power and charging of
connected devices such as laptops and mobile devices. A minimum
of 60 and maximum of 90 watts is required for additional charging
capabilities.
Connect a USB Type-C cable into the port at the base of the
speakerphone from a power adapter marked with a lightning symbol.
Copyright © 2021 WyreStorm Technologies |
HALO 90 Quickstart Guide | 210914
wyrestorm.com
2. Connect the other end of the supplied cable into an available port on your
PC or Laptop.
USB-C
4. When a USB device is connected, the speakerphone will automatically
power on, indicated by the Power LED shown below.
The Halo 90 Speakerphone allows for the connection of up to two
USB-A device ports for connection of keyboard/mouse or webcams.
Connect a USB Type-A cable into the port at the base of the
speakerphone marked with a SS USB symbol.
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
1 of 3
Quickstart Guide
support@wyrestorm.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wyrestorm HALO 90
Summary of Contents for Wyrestorm HALO 90
- Page 1 Additional Connections Power Adapter to provide direct USB-C power and charging of The Halo 90 Speakerphone allows for the connection of up to two connected devices such as laptops and mobile devices. A minimum USB-A device ports for connection of keyboard/mouse or webcams.
- Page 2 To connect the WyreStorm HALO Speakerphone to your Microsoft Teams software, first navigate to your settings pane which can be found by clicking on your display image in the top right hand corner, then click on the devices tab. Here you can change the Audio device by using the dropdown menu. Select WyreStorm HALO device under the applicable options.
- Page 3 Note: HDMI & USB-C video outputs cannot be used at the same time. Note: It is highly recommended to use a native USB-C to USB-C cable between the HALO 90 and a PC due to power consumption requirements. Using a USB-C to USB-A cable may not provide enough current for HALO to fully operate.
Need help?
Do you have a question about the HALO 90 and is the answer not in the manual?
Questions and answers