Advertisement
1
Assembling the Skull to Support Base
Insert the connecting rod on the Support Base (E) into the
connecting hole located on the back middle of Skull (C).
3 Attaching the Support Pole to Support Base
Stack the Support Pole (D) onto the top of the Support Base (E)
and lock together with locking pin attached. Insert the connecting
rod on the top of the Support Pole (D) into the hole on the left
shoulder of Body of Witch (A) and lock with Cotter Pin (G).
5 Assembling the Broom
Insert the connecting rods on Broom (F) into the matching holes on the
Legs of Witch. Note: The holes are located on the top of the left Knee of
Witch and on the right thigh of Witch.
ASSEMBLY
2
Assembling the Body of Witch to Skull
Insert the connecting rods on the bottom of the Body of Witch (A) into
the holes at the top of the Skull (C) then fasten them together at the
connecting loops with Plastic Ties (I).
4 Assembling the Legs of Witch
Insert the connecting rods on the top of the Legs of Witch (B) into the
matching holes on the bottom of Body of Witch and insert connecting
rods on the right heel of Witch into the side of the Skull then fasten
them together at the connecting loops with Plastic Ties.
6
Securing the Witch and Skull to the Ground
Insert Ground Stakes (H ) at the front base of the Skull by placing the
Stake through the metal loops then into the ground. Place Stakes over
the metal on the Support Base then into the ground.
Advertisement
