Related Manuals for Orava OS-112
Summary of Contents for Orava OS-112
- Page 1 OS-112 Instructiuon manual Read this manual carefully before using the device and keep it for future reference. Juicer...
-
Page 2: General Safety Instructions And Warnings
ORAVA electrical appliances are manufactured according to state-of-the-art knowledge and recognized safety regulations. Nevertheless, improper or improper use or improper use may result in injury or endangerment to the life of the user or a third party, or to a third party. - Page 3 • Use the appliance only for the intended purpose and in the manner specified by the manufacturer. • The appliance is intended for home and similar indoor use without special focus. • This appliance is intended, in addition to domestic use, for the following uses: - in shops, offices and other similar work environments;...
- Page 4 1.3 Electrical safety • Before connecting the appliance to the power supply for the first time, make sure that the voltage on the appliance label corresponds to that of the household electrical outlet. • The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz. •...
- Page 5 • To avoid electrical shock, plug the power cables into properly grounded electrical sockets. If the device is equipped with a 3-pole plug, do not use adapters that do not have a grounding element or remove the grounding element from the plug or adapter. •...
- Page 6 1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the appliance in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from finger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household appliances.
- Page 7 2. Special safety instructions. Read carefully! The electrical equipment shall be designed and manufactured in such a way as to allow safe operation and use by persons without professional qualifications. Despite all the precautions taken by the manufacturer for safe use and operation , there are certain residual risks and potential hazards associated with them.
- Page 8 Inspection/Commissioning • The appliance is intended for food preparation. Therefore, thoroughly clean all parts before commissioning as described in the “Commissioning” section. „Cleaning and maintenance“. • Never clean the device (its drive unit with electrical parts and controls) and the power cord with plug in a way (under running water) that could cause liquid to flow into the device.
- Page 9 • Do not place or use this product near containers containing water. If the device falls into the water, do not remove it! Unplug the power cord from the wall outlet before removing the machine from the water. In such cases, take the equipment to a professional service center to check that it is safe and functioning properly.
- Page 10 • Do not bundle the power cord. The power cord must remain accessible for safe disconnection from the power supply. • Do not let the power cord hang freely and do not allow it to be freely accessible and reachable by children. •...
-
Page 11: Description Of Parts
Description of parts 1 Pressure roller 2 Feeding tube with juicer cover 3 Centrifugal sieve with metal blades 4 Sieve holder with drain 5 Safety locking mechanism 6 Base with motor unit 7 P/0/1/2 switch (Pulse mode/Off/On) 8 Fruit pulp container 9 Container with measuring cup... -
Page 12: Preparation Before Use
Preparation before use Do not connect the device to the mains during preparation. Unpack the device and remove all packaging material. To remove any dirt that may have formed during the packaging process, clean the inside, knives (filter basket disc) and cover with a dry, lint-free cloth. When cleaning the inside, be careful not to injure yourself on the sharp knives of the sieve. -
Page 13: Operation
Operation Juicing 1 Place the assembled appliance on a flat and firm surface (table, sink) and place a cup or juice jug under the drain. 2 Connect the appliance to the mains. 3 Put the whole fruit (or cut the fruit into smaller pieces). Insert the fruit inside the feeding tube and press it lightly on the bottom with the pressure roller. -
Page 14: Technical Specifications
Technical specifications Power supply: 220 - 240 V~ 50/60 Hz Power consumption: 600 W Protection class: II (protection against electric shock is provided by double insulation) Speed: 17 000 - 19 000/rpm Dimensions (WxDxH): 27 x 21 x 33 cm (without containers) Continuous operation time (KB): 60 sec. - Page 15 Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING Dispose of used packaging material at a municipal waste disposal site.
Need help?
Do you have a question about the OS-112 and is the answer not in the manual?
Questions and answers